761569

Gaggenau CV282111 Manual

57
Zoom out
Zoom in
Previous page
1/64
Next page
56
en Cleaning
Cleaning the overflow container
1Unscrew the overflow container with both hands.
Note: Hold the overflow container level to prevent
liquid from leaking out.
2Empty the overflow container and rinse it out.
3If necessary, unscrew the screw and clean the
overflow container without the screw in the
dishwasher.
4Clean the overflow container before screwing it
back into place.
Notes
– Make sure that the supply to the overflow container
is not blocked. Remove any objects that have
entered the appliance once it has cooled down. To
do this, remove the ventilation grille and the metal
grease filter.
– Any liquid entering the appliance from above will be
collected in the overflow container. Unscrew the
overflow container and empty it.
Twist knob
The twist knob is best cleaned using lukewarm soapy
water. Do not use harsh or abrasive cleaning agents. Do
not clean the twist knob in the dishwater or using
rinsing water. This may damage it.
Wireless temperature sensor
Temperature sensor
Clean the temperature sensor with a damp cloth. Never
clean it in the dishwasher. Do not immerse it in water or
clean it under running water.
Remove the temperature sensor from the saucepan after
cooking. Store it in a clean, safe place (such as in its
packaging) away from sources of heat.
Silicone patch
Clean and dry before attaching to the temperature
sensor. Dishwasher safe.
Note: Cookware with the silicone patch must not be left
to soak for long periods in soapy water.
Temperature sensor window
The sensor window must always be clean and dry.
Proceed as follows:
▯Remove dirt and oil splatters regularly.
▯Use a soft cloth or cotton buds and window cleaner
for cleaning.
Notes
– Do not use abrasive cleaning agents such as
scouring pads, scrubbing brushes or cream
cleaners.
– Do not touch the sensor window with your fingers.
This may make it dirty or scratch it.
57
Frequently Asked Questions (FAQ) en
{
Frequently Asked Questions (FAQ)
Frequentl y Asked Questi ons (FAQ)
Using the appliance
Why can I not switch on the hob and why is the childproof lock symbol lit?
The childproof lock is now active.
You can find information about this function in the section entitled ~ "Childproof lock".
Why are the illuminated displays flashing and why is a signal sounding?
Remove any liquid or remnants of food from the control panel. Remove any objects from the control panel.
You can find out how to deactivate the audible signal in the section entitled ~ "Basic settings".
The ventilation system does not switch on even though the automatic start is set.
Switch on the ventilation system manually or check the configuration of the automatic mode. You can find additional infor-
mation about this in the section entitled ~ "Basic settings".
The ventilation system runs with too much or too little power in sensor control mode.
The sensor sensitivity for the ventilation system is incorrectly configured.
You can find additional information about this setting in the section entitled ~ "Basic settings".
The ventilation system remains on even though the cooking zones have been switched off.
Manually switch off the ventilation system.
You can find additional information about this setting in the section entitled ~ "Operating the appliance".
The ventilation system switches on even though the appliance is switched off.
The run-on function with sensor control is selected.
You can find additional information about this setting in the section entitled ~ "Basic settings".
The air intake is too weak.
Ensure that the metal grease filter is clean.
To find out how to clean and replace the filter, refer to the section entitled ~ "Cleaning".
Noises
Why I can hear noises while I'm cooking?
Noises may be generated while using the hob depending on the base material of the cookware. These noises are a nor-
mal part of induction technology. They do not indicate a defect.
Possible noises:
A low humming noise like the one a transformer makes:
Occurs when cooking at a high heat setting. The noise disappears or becomes quieter when the heat setting is reduced.
Low whistling noise:
Occurs when the cookware is empty. This noise disappears when water or food is added to the cookware.
Crackling:
Occurs when using cookware made from different layers of material or when using cookware of different sizes and dif-
ferent materials at the same time. The loudness of the noise can vary depending on the quantity of food being cooked or
the cooking method.
High-pitched whistling noises:
Can occur when two hotplates are used at the highest heat setting at the same time. The whistling noises disappear or
become quieter when the heat setting is reduced.
Fan noise:
The hob is equipped with a fan that switches on automatically at high temperatures. The fan may continue to run even
after you have switched off the hob if the temperature detected is still too high.
… 57 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CV282111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CV282111 in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CV282111

Gaggenau CV282111 User Manual - German - 64 pages

Gaggenau CV282111 User Manual - Dutch - 64 pages

Gaggenau CV282111 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info