761569
49
Zoom out
Zoom in
Previous page
1/64
Next page
48
en Home Connect
Home Connect settings
You can adjust Home Connect to suit your requirements
at any time.
In the basic settings for your hob, navigate to the Home
Connect settings to display network and appliance
information.
Notes
The •’ƒ setting is only displayed if the appliance
is connected to your home network.
The •’„ setting is only displayed if the appliance
has previously been connected to a network.
The •’† setting is only displayed if an update is
available.
The •’‡ setting is only displayed if the after-sales
service is attempting to connect to the appliance.
You can end this at any time after granting access.
The •’ˆ and •’‰ settings are only displayed if
there is Wi-Fi connection.
Deactivating WLAN
If WiFi has been activated, you can use the Home
Connect functions.
Note: In networked standby mode, your appliance
requires a maximum of 2 W.
1Open the basic setting ™š.
2Touch the ® symbol repeatedly until the •’„ and
’‹¯ settings flash alternately.
‹¯ lights up on the hotplate display.
3Set the value to ‹”” using the twist knob.
This deactivates WiFi; the D symbol goes out on the
control panel.
Note: The network settings will be stored. When the
WiFi function is activated again, the hob will try to
reconnect to the previously stored network.
Disconnecting from the network
You can disconnect your hob from the network at any
time.
Note: If your hob is disconnected from the network, it is
not possible to operate it using Home Connect.
1Open the basic setting ™š.
2Touch the ® symbol repeatedly until the •’‚ and
¯“£ settings flash alternately.
‹¯ lights up on the hotplate display.
3Set the value to ‹”” using the twist knob.
This disconnects the appliance from your home network;
the D symbol goes out on the control panel.
Indicator/
symbol
Function
•’‚ / ¯“£ Home network login (Wi-Fi)
‹”” Not connected /disconnect network
’‹‚ Connect automatically
’‹ƒ Connect manually
‹¯ Connected
•’ƒ / ˜‘‚ Connection to app
‹”” Not connected/
login process complete
‹¯ Connect
•’„ / ’‹¯ Connection to home network (Wi-Fi)
‹”” Wireless module switched off
‹¯ Wireless module switched on
•’… / ¥“† Settings via app
‹”” Switched off
‹¯ Switched on*
•’† / —˜š Software update
š“” Update available and ready for installa-
tion
‚¯† Start installation
•’‡ / ¥“š Remote access by after-sales service
‹”” Not authorised
‹¯ Authorised
•’ˆ / †£¥ Wi-Fi signal strength
¯‘ Not connected to home network (Wi-
Fi)
Signal strength 1(weak)
ƒ Signal strength 2(moderate)
Signal strength 3(good)
•’‰ / †“¥ Connection to Home Connect server
¯‘ Not connected
‹¯ Connected
* Basic setting
W
''
49
Home Connect en
Connecting to the network
1Open the basic setting ™š.
2Touch the p symbol repeatedly until the •’‚ and
¯“£ settings flash alternately.
‹”” lights up on the hotplate display.
3Use the twist knob to set the value to
’‹‚ "Connect automatically", or
’‹ƒ "Connect manually".
4Follow the instructions in the section entitled
"Logging into your home network automatically" or
"Logging into your home network manually".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
The app must be open and be set up.
1Open the basic setting ™š.
2Touch the p symbol repeatedly until the •’ƒ and
˜‘‚ settings flash alternately.
‹”” lights up on the hotplate display.
3Set the value to ‹¯ using the twist knob.
4Launch the app on your mobile device and follow
the instructions in the app to complete the
connection process.
When the value ‹¯ stops flashing on the hotplate
display and the value ‹”” lights up again, the login
process is complete.
Settings via app
Using the Home Connect app, you can easily access the
basic settings for your hob and send settings for the
hotplates to the hob.
Notes
Before you can change the basic settings, the hob
must be switched off.
Operating the appliance directly from the appliance
always takes priority. It is not possible to operate
the appliance using the Home Connect app during
this time.
When the appliance is delivered, the settings
transfer option is already activated by default.
If the transfer of settings has been deactivated, only
the hob's operating statuses are displayed in the
Home Connect app.
1Open the basic setting ™š.
2Touch the p symbol repeatedly until the •’… and
¥“† settings flash alternately.
3To activate transfer, select the ‹¯ value with the
twist knob. To deactivate transfer, select the ‹””
value.
Confirming settings
As soon as cooking settings are transmitted to a
hotplate, the hotplate indicator will start to flash. To
confirm that you want to use these settings, touch the
flashing indicator ·. To reject these settings, touch any
other button on the hob.
Software update
The software update function is used to update your
hob's software (e.g. for the purpose of optimisation,
troubleshooting or security updates). To do this, you
need to be a registered Home Connect user, have
installed the app on your mobile device and be
connected to the Home Connect server.
As soon as a software update is available, you will be
informed by the Home Connect app, from which you will
also be able to download the update.
Once the update has been successfully downloaded,
you can start installing it via the hob (basic settings,
settings š, setting •’†/—˜š) or the Home Connect
app if you are on your local area network.
The Home Connect app will notify you once installation
is complete.
W
W
'
'
W
'
'
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CV282111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CV282111 in the language / languages: English as an attachment in your email.

The manual is 4,74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CV282111

Gaggenau CV282111 User Manual - German - 64 pages

Gaggenau CV282111 User Manual - Dutch - 64 pages

Gaggenau CV282111 User Manual - French - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info