702999
15
Zoom out
Zoom in
Previous page
1/52
Next page
15
Operating the appliance
en
1
Operating the appliance
Operati ng the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
m Warning – Risk of burns!
The filter cover will get very hot very quickly if left on the
hob. Never place the filter cover on the hob.Do not
place pots, pans or other hot objects on the filter cover.
Note: Switch on the ventilation system when you start
cooking and switch it off again a few minutes after you
have finished cooking. This is the most effective way of
removing steam from the kitchen.
Note: Never use the appliance without the container,
metal grease filter or filter cover.
Switching the hob on and off
Switch the hob on and off using the main switch.
To switch on: Position the twist knob on the control
panel. Touch the # symbol. The symbols for the
hotplates and the functions available at this time light
up. lights up next to the hotplates. The hob is ready
for use.
To switch off: Touch the # symbol until the display
goes out. All hotplates are switched off. The residual
heat indicator remains lit until the hotplates have cooled
down sufficiently.
Notes
The hob will switch itself off automatically if all the
hotplates have been switched off for more than
20seconds and the ventilation system is switched
off.
The selected settings are stored for 5 seconds after
the hob has been switched off.
If the hob is switched back on during this time, the
heat settings that were previously set will flash. To
apply these settings, tap on the twist knob within
the next 5 seconds.
If you do not tap the twist knob or you touch a
different sensor button, all the previous settings will
be deleted.
Setting a hotplate
Set the required hotplate using the twist knob.
Heat setting 1= lowest setting.
Heat setting 9= highest setting.
Every heat setting has an intermediate setting. This is
shown in the hotplate display as .5.
Notes
To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Selecting a hotplate and heat setting
The hob must be switched on.
1 Select the hotplate. To do this, touch the twist knob
in the appropriate area for the required hotplate.
2 Within the next 10seconds, turn the twist knob until
the required heat setting appears in the heat setting
display.
The heat setting is set.
Notes
When placing an item of cookware on the flexible
cooking zone, it must be positioned correctly
according to size; see the section entitled ~ "Flex
function"
.
The cookware is detected and the hotplate is
selected automatically. You can now configure the
settings.
If the indicators flash after you have changed the
settings, check whether the cookware is suitable for
induction cooking. See the section entitled
~ "Cookware test".
Changing the heat setting
Select the hotplate and change the heat setting using
the twist knob.
ZZ
 
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CV282 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CV282 in the language / languages: English as an attachment in your email.

The manual is 3,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CV282

Gaggenau CV282 Installation Guide - English, German - 48 pages

Gaggenau CV282 User Manual - German - 52 pages

Gaggenau CV282 Installation Guide - Dutch - 48 pages

Gaggenau CV282 User Manual - Dutch - 56 pages

Gaggenau CV282 Installation Guide - Danish, French - 48 pages

Gaggenau CV282 User Manual - French - 56 pages

Gaggenau CV282 Installation Guide - Italian, Swedish, Norwegian, Finnish - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info