755851
16
Zoom out
Zoom in
Previous page
1/32
Next page
16
en Preparing beverages
To prepare a drink:
The appliance must be switched on. The bean container
must be filled.
1Rotate function selector to position 2.
2Using the rotary selector, select a coffee beverage
with milk. To select a beverage made with ground
coffee, you must first fill the ground coffee drawer.
3Place a cup or glass under the coffee dispenser.
4Press I to start.
- or -
Touch the C symbol first, then set the size or
strength for example, using the rotary selector.
Confirm with .
The milk is drawn in and prepared and then the coffee is
brewed.
Notes
While the beverage is dispensed, the & symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
Using the symbol, you can save the current
beverage: Touch the symbol, turn the function
selector to a free memory location and save the
entry. ~ "Individual beverages" on page 17
Dried-on milk residues are difficult to remove, so
always clean the milk system after every use.
~ "Cleaning the milk system" on page 23
Preparing milk froth and warm milk
mWarning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
To prepare a drink:
The appliance must be switched on.
1Rotate the function selector to position 2.
2Connect the milk hose. ~ "Preparing a coffee with
milk" on page 15
3Select "Milk froth" or "Warm milk" with the rotary
selector.
4Place a cup or glass under the coffee dispenser.
5Touch the C symbol.
6Set the size using the rotary selector.
7Press to confirm the settings.
8Press I to start.
The milk is drawn in and then flows into the cup or
glass.
Notes
While the beverage is dispensed, the & symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
Using the symbol, you can save the current
beverage: Touch the symbol, turn the function
selector to a free memory location and save the
entry. ~ "Individual beverages" on page 17
Dried-on milk residues are difficult to remove, so
always clean the milk system after every use.
~ "Cleaning the milk system" on page 23
Preparing hot water
mWarning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
The appliance must be switched on.
1Remove the milk tube from the milk container.
2Rotate function selector to position 2.
3Select "Hot water" using the rotary selector.
4Place a cup or glass under the coffee dispenser.
5Touch the C symbol.
6Set the size using the rotary selector.
7Touch the C symbol.
8Set the temperature using the rotary selector.
9Confirm with .
10 Press I to start.
The water is heated and then flows into the cup or glass.
Notes
While the beverage is dispensed, the & symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
Using the symbol, you can save the current
beverage: Touch the symbol, turn the function
selector to a free memory location and save the
entry. ~ "Individual beverages" on page 17
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CM470112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CM470112 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CM470112

Gaggenau CM470112 User Manual - German - 32 pages

Gaggenau CM470112 User Manual - Dutch - 32 pages

Gaggenau CM470112 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info