755851
10
Zoom out
Zoom in
Previous page
1/32
Next page
10
en Setting up the appliance
Hibernate mode
The appliance goes into hibernate mode if the function
selector is turned to 0 or if the child lock is activated.
The brightness of the display is dimmed in hibernate
mode during the first few minutes.
The display then switches itself off.
Notes
In Basic settings, you can select whether the
Gaggenau logo is to be displayed during hibernate
mode. ~ "Basic settings" on page 19
The brightness of the display depends on the
vertical viewing angle. You can adjust the display
using the "Brightness" setting in the basic settings.
Activating the appliance
To leave hibernate mode or to activate the display when
it has been switched off, turn the function selector.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Note: If no drip tray is inserted, the appliance cannot be
switched on and no water will flow from the coffee
dispenser.
The message "Insert trays" appears.
Setting up the appliance
Setting up the appliance
Note: Only use the appliance in frost-free areas. If the
appliance was transported or stored at temperatures
below 0°C, you must wait for at least 3hours before
using it.
Before the appliance can be switched on and used, it
must be assembled and connected according to the
enclosed installation instructions.
Initial settings
Notes
The query appears automatically when first
switched on after connection to a power outlet.
You can change the settings at any time. ~ "Basic
settings" on page 19
1Switch on the appliance at the main switch.
The preset language appears in the display.
2Turn the rotary selector to select the required
display language.
3Press to confirm.
The temperature unit appears in the display.
4Use the rotary selector to select the required
temperature unit.
5Press to confirm.
The preset capacity unit appears in the display.
6Use the rotary selector to select the required
capacity unit.
7Press to confirm.
The preset weight unit appears in the display.
8Use the rotary selector to select the required
weight unit.
9Press to confirm.
The display shows "Initial set-up complete".. Confirm
with . The appliance is now ready to use.
Note: If the language is changed, the system restarts.
This takes a few seconds.
'HXWVFK
6SUDFKH
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CM470112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CM470112 in the language / languages: English as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CM470112

Gaggenau CM470112 User Manual - German - 32 pages

Gaggenau CM470112 User Manual - Dutch - 32 pages

Gaggenau CM470112 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info