512359
17
Zoom out
Zoom in
Previous page
1/32
Next page
17
Preparing beverages
en
Preparing hot water
m
Warning – Risk of burns!
The milk system becomes very hot. After use, allow it to
cool down first before touching it.
The appliance must be switched on and the water tank
filled.
1 Remove the milk hose from the milk container.
2 Rotate the function selector to position 2.
3 Select "Hot water" using the rotary selector.
4 Place a cup or glass under the coffee dispenser.
5 Touch the C symbol.
6 Set the size using the rotary selector.
7 Touch the C symbol.
8 Set the temperature using the rotary selector.
9 Press to confirm.
10 Press I to start.
The water is heated and then flows into the cup or glass.
Notes
While the beverage is dispensed, the & symbol is
displayed. Touch this symbol to stop the beverage
being prepared.
Using the symbol, you can save the current
beverage: Touch the symbol, turn the function
selector to a free memory location and save the
entry. ~
"Individual beverages" on page 18
Setting the grinding level
m
Warning – Risk of injury!
Do not reach into the grinding unit.
Using the slider for the grinding level, the desired
fineness of the ground coffee can be set between a fine
grinding level (left) and a coarser grinding level (right).
Notes
The new setting only becomes noticeable after the
second cup of coffee.
Set a finer grinding level with dark-roasted beans
and a coarser grinding level with lighter beans.
If the display shows the message "Set coarser
grinding level", the coffee beans are being ground
too finely. Set a coarser grinding level. To do so,
slide the slider to the right.
Only make small changes to the grinding level
setting.
Changing bean type
If you are using a new type of bean, the Empty grind
function allows you to run the grinding unit until empty
of your previous bean type.
The appliance must be switched on.
1 Remove the bean container and empty out the
beans.
2 Add the new beans and reinsert the bean container.
The message "New type of coffee beans in bean
container?" appears.
3 Press to confirm.
The grinding unit is then emptied of your previous bean
type in two grinding stages.
Note: This message always appears when the bean
container is inserted. If you do not want to empty the
grinding unit, e.g. when only refilling with beans,
confirm with '.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CM450 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CM450 in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CM450

Gaggenau CM450 User Manual - German - 28 pages

Gaggenau CM450 User Manual - Dutch - 28 pages

Gaggenau CM450 User Manual - French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info