761567
49
Zoom out
Zoom in
Previous page
1/60
Next page
48
en Hood connection
Connecting appliances via your home network
If the appliances are connected to each other via your
home network, both the hood controls and Home
Connect can be used to operate the hob.
Notes
Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the
hob.~ "Important safety information" on page 6
If the appliance is being operated by means of the
controls on the extractor hood, this mode of
operation always has priority. It is not possible to
use the hood controls on the hob during this time.
In networked standby mode, your appliance
requires a maximum of 2 W.
Setting up
To set up the connection between the hob and cooker
hood, the hob must be switched on.
Connecting directly
Make sure that the extractor hood is switched off.
For more information, refer to the section entitled
"Connecting to the hob" in the instruction manual for
your extractor hood.
Note: If you connect your hob directly to the extractor
hood, it cannot be connected to your home network as
well and you will not be able to use Home Connect.
1Open the basic settings.
2Touch the t symbol repeatedly until the ™“
setting appears.
‹”” will be lit on the hotplate display.
3Set the value to using the twist knob.
will flash on the hotplate display.
4You have 2 minutes to initiate the connection
process on the extractor hood.
Once the hob is connected to the extractor hood, the
value ‹¯ appears on the hotplate display. The symbols
for the hood controls on the hob are displayed on the
hob's control panel.
Connecting via your home network
You require a router that has WPS functionality.
You require access to your router.If you do not have this,
follow the steps for "Direct connection".
When you begin, make sure that the extractor hood is on
your home network.
1Open the basic settings.
2Touch the t symbol repeatedly until the ™“
setting appears.
‹”” will be lit on the hotplate display.
3Set the value to using the twist knob.
will flash on the hotplate display.
4Press the WPS button on the router within the next
2 minutes.
The hob will be connected to your home network
and the value ƒ will appear on the hotplate display.
5Initiate the process for connecting to the extractor
hood.
Once the hob is connected to the extractor hood, the
value ‹¯ appears on the hotplate display. The symbols
for the hood controls on the hob are displayed on the
hob's control panel.
Note: Connection can only be established when both
appliances are connected to your home network and the
connection process has been initiated for both of them.
If the connection process has already timed out for one
of the two appliances, try to connect again (basic
settings, ™“ setting).
Resetting connection
You can reset the connections you have saved for your
home network and extractor hood at any time.
1Open the basic settings.
2Touch the t symbol repeatedly until the ™“
setting appears.
3Set the value to ‹”” using the twist knob.
49
Hood connection en
Control the hood via the hob
In the basic settings of your hob you can adjust the
behaviour of your extractor hood depending on the
switch-on/off of the hob or individual cooking zones.
~ "Hood control settings" on page 49
You can select other settings using the control panel.
Setting the fan
Switching on
Touch the } symbol.
Setting fan level
Turn the twist knob clockwise or anti-clockwise to adjust
the fan setting.
The following settings are possible:
Switching off
To switch the fan off and continue cooking:
1Touch the } symbol.
2Use the twist knob to select the fan setting .
To switch off the hob:
How the fan behaves once the hob is switched off
depends on the basic setting you have selected.
If the ¥ symbol is displayed, the fan is in run-on mode.
Note: Even once the hob and fan have been switched
off, the E symbol will still be faintly visible.
Setting the hood lighting
You can switch the hood light on and off via the hob's
control panel.
Touch the ž symbol.
Depending on the basic settings you have selected, the
light will automatically be switched on or off when the
hob is switched on or off. ~ "Hood control settings"
Hood control settings
Hood control settings
You can adapt the hood controls to suit your needs at
any time.
Changing the basic settings ~ "Basic settings"
Note: The ™‘, ™›, ™™ and ™š settings are only
displayed if the appliance is connected to an extractor
hood.
Indicator/
symbol
Function
Fan off
Automatic mode
The fan starts automatically when steam is pro-
duced
, ƒ, Fan settings
Intensity: Low, medium, high
˜PowerBoost function
»Intermittent ventilation
¥Fan run-on
Indicator/
symbol
Function
™“ Hob-to-hood connection
‹”” Not connected*/disconnect.
Connect.
ƒConnected to home network.
‹¯ Connected to extractor hood.
™‘ Automatic fan switch-on
‹”” Switched off.
The hood will need to be switched on man-
ually if required.
Switched on in automatic mode.*
In automatic mode, the hood switches
itself on when you switch on one of the
cooking zones.
Switched on in manual mode.
The hood switches itself on at the lowest
setting when one of the cooking zones is
switched on.
ƒSwitched on in manual mode.
The hood switches itself on at a medium
setting when one of the cooking zones is
switched on.
Switched on in manual mode.
The hood switches itself on at the highest
setting when one of the cooking zones is
switched on.
™› Fan run-on
‹”” The fan switches itself off when the hob is
switched off.
Switched on in automatic mode.*
‹¯ Switched on with standard fan run-on.
¯‹ Settings cannot be changed.
™™ Switch light on automatically
‹”” Switched off.*
‹¯ Switched on.
The light switches itself on when you
switch on the hob.
™š Switch light off automatically
‹”” Switched off.*
‹¯ Switched on.
The light switches itself off when you
switch off the hob.
* Basic setting
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI292112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI292112 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI292112

Gaggenau CI292112 User Manual - German - 60 pages

Gaggenau CI292112 User Manual - Dutch - 60 pages

Gaggenau CI292112 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info