761567
13
Zoom out
Zoom in
Previous page
1/60
Next page
12
en Getting to know your appliance
Touch keys
When the hob heats up, the symbols for the touch keys
available at this time light up.
Touching a symbol activates the associated function. A
confirmation signal sounds.
Notes
The corresponding symbols for the touch keys light
up depending on whether they are available.
The indicators for the available functions light up in
white. Once a function is selected, its indicator
lights up in orange.
Always keep the control panel clean and dry.
Moisture can prevent it from working properly.
Do not pull cookware close to the displays and
sensors. The electronics could overheat.
The hotplates
Residual heat indicator
The hob has a residual heat indicator for each hotplate.
This indicates that a hotplate is still hot. Do not touch a
hotplate while the residual heat indicator is lit up.
The following indicators are shown depending on the
amount of residual heat:
Display : High temperature
Display œ: Low temperature
If you remove the cookware from the hotplate during
cooking, the residual heat indicator and the selected
heat setting will flash alternately.
When the hotplate is switched off, the residual heat
indicator will light up. Even after the hob has been
switched off, the residual heat indicator will stay lit for
as long as the hotplate is still warm.
Cooking zones
Û/$Single cooking zone Use cookware that is a suitable size.
òThree-ring cooking zone This ring switches on automatically when you use cookware with a base that cov-
ers the outer zone (ð or ò).
áFlexZone See the section entitled ~ "Flex function"
Only use cookware suitable for induction cooking; see section ~ "Induction cooking"
13
Twist-Pad with Twist knob en
j
Twist-Pad with Twist knob
Twist- Pad with Twist knob
The twistpad is the area in which you can use the twist
knob to select the hotplates and heat settings. The twist
knob automatically centres itself in the twistpad area.
The twist knob is magnetic and is placed on top of the
twistpad. To activate a hotplate, touch the twist knob at
the level for the required hotplate. Turning the twist
knob selects the heat setting.
Position the twist knob on the twist pad so that it is in
the centre of the indicators which delimit the twist pad
area.
Note: Even if the twist knob is not entirely central, this
will not affect how the twist knob works.
Removing the twist knob
Removing the twist knob activates the wipe protection
function.
The twist knob can be removed during cooking. The
wipe protection function is activated for 10 minutes. If
the twist knob is not returned to its position before this
time elapses, the hob will switch off.
mWarning – Risk of fire!
If a metallic object is placed in the twist pad area during
these 10 minutes, the hob may continue to heat up. For
this reason, always switch off the hob using the main
switch.
Storing the twist knob
A strong magnet is located inside of the twist knob.
Keep the twist knob away from magnetic data carriers
such as credit cards and cards with magnetic strips.
Otherwise, these data carriers may be damaged beyond
repair.
The magnet may also cause faults on televisions and
screens.
Note: The twist knob is magnetic. Metal particles stuck
to the bottom may scratch the surface of the hob.
Always clean the twist knob thoroughly.
1
Operating the appliance
Operati ng the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
Switching the hob on and off
Use the main switch to switch the hob on and off.
When you first switch on the appliance, you will be
prompted to set up your home network. The · symbol
will be lit dimly for a few seconds on the display panel.
To begin setting up the connection, touch the · sensor
and proceed in accordance with the information given in
the section entitled~ "Home Connect" on page 42. To
exit initial set-up, touch any sensor.
To switch on: Position the twist knob on the control
panel. Touch the # symbol. The symbols for the
cooking zones and the functions available at this time
light up. lights up next to the cooking zones. The hob
is ready for use.
To switch off: Touch the # symbol until the display
goes out. All the hotplates are switched off. The
residual heat indicator remains lit until the cooking
zones have cooled down sufficiently.
Notes
If the appliance has not been connected to your
home network or the connection has been broken,
network connection initial set-up will be activated
whenever you switch on the hob.
The hob will automatically switch itself off if all
hotplates have been switched off for more than
20 seconds.
The selected settings are stored for 5 seconds after
the hob has been switched off.
If the hob is switched back on during this time, the
heat settings that were previously set will flash. To
apply these settings, tap on the twist knob within
the next 5 seconds.
If you do not tap the twist knob or you touch a
different sensor button, all the previous settings will
be deleted.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI292112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI292112 in the language / languages: English as an attachment in your email.

The manual is 3,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI292112

Gaggenau CI292112 User Manual - German - 60 pages

Gaggenau CI292112 User Manual - Dutch - 60 pages

Gaggenau CI292112 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info