703242
17
Zoom out
Zoom in
Previous page
1/60
Next page
17
Flex function
en
|
Flex function
Flex functi on
The flexible cooking zone can be used as a single
hotplate or as two independent hotplates, as required.
It consists of four inductors that work independently of
each other. If the flex function is in use, only the area
that is covered by cookware is activated.
Advice on using cookware
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
As two independent hotplates
The flexible cooking zone is used like two independent
hotplates.
Activating
See the section entitled ~ "Operating the appliance"
As a single hotplate
Using the entire cooking zone by connecting both
hotplates.
Linking the two hotplates
1 Set down the cookware. Select one of the two
hotplates in the flexible cooking zone and set the
heat setting.
2 Touch the ª symbol. The ª indicator lights up next
to the cooging zone display.
The flexible cooking zone has now been activated. The
heat setting appears in the two displays for the flexible
cooking zone.
Notes
If both hotplates are set to different heat settings
before being linked, switch both hotplates to 0 on
activation.
If there is a cooking timer programmed for one
hotplate, this will also be assigned to the second
hotplate when the two are linked.
Changing the heat setting
Select one of the two hotplates assigned to the flexible
cooking zone and set the heat setting using the twist
knob.
Adding new cookware
1 Set down additional cookware in the appropriate
position according to size.
If correctly positioned, cookware is detected and
the hotplate is selected automatically; the
corresponding part of the display ª flashes.
2 Use the twist knob to confirm the setting within
90 seconds. The indicators stop flashing and the
cookware is heated up.
Note: If the indicators continue to flash, check
whether the cookware is suitable for induction
cooking ~ "Cookware check"
Note: If the cookware is moved to the hotplate being
used or lifted up, the hotplate begins an automatic
search and the heat setting selected previously is
retained.
Disconnecting the two cooking zones
1 Select one of the two cooking zones assigned to
the FlexZone.
2 Touch the ª symbol.
3 The « symbol appears in the cooking zone display.
The Flex function has been deactivated. The two
cooking zones now operate independently of one
another.
Note: If the hob is switched off, and then switched back
on again later, the flexible cooking zone is reset to
function as two independent hotplates.
As a single hotplate
Diameter smaller than or equal to 13
cm
Place the cookware on one of the four
positions that can be seen in the illus-
tration.
Diameter greater than 13 cm
Place the cookware on one of the
three positions that can be seen in the
illustration.
If the cookware takes up more than
one hotplate, place it starting on the
upper or lower edge of the flexible
cooking zone.
As two independent hotplates
The front and rear hotplates each have two
inductors and can be used independently of
each other. Select the required heat setting
for each of the hotplates. Use only one item
of cookware on each hotplate.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI292101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI292101 in the language / languages: English as an attachment in your email.

The manual is 1,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI292101

Gaggenau CI292101 User Manual - German - 60 pages

Gaggenau CI292101 User Manual - Dutch - 60 pages

Gaggenau CI292101 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info