703239
45
Zoom out
Zoom in
Previous page
1/60
Next page
45
Home Connect
en
Notes
The
•’ƒ setting is only displayed if the appliance
is connected to your home network.
The •’„ setting is only displayed if the appliance
has previously been connected to a network.
The •’† setting is only displayed if an update is
available.
The •’‡ setting is only displayed if the after-sales
service is attempting to connect to the appliance.
You can end this at any time after granting access.
The •’ˆ and •’‰ settings are only displayed if
there is Wi-Fi connection.
Deactivating WLAN
If Wi-Fi has been activated, you can use the Home
Connect functions.
Note: In networked standby mode, your appliance
requires a maximum of 2 W.
1 Open basic setting ™Š.
2 Touch the ® symbol repeatedly until the •’„ and
’‹¯ settings flash alternately.
‹¯ will be lit on the hotplate display.
3 Set the value to ‹”” using the twist knob.
This deactivates Wi-Fi; the D symbol will go out on the
control panel.
Note: The network settings will be stored. When the
WiFi function is activated again, the hob will try to
reconnect to the previously stored network.
Disconnecting from the network
Disconnecting from the network
You can disconnect your hob from the network at any
time.
Note: If your hob is disconnected from the network, it is
not possible to operate it using Home Connect.
1 Open basic setting ™Š.
2 Touch the ® symbol repeatedly until the •’‚ and
¯“£ settings flash alternately.
‹¯ will be lit on the hotplate display.
3 Set the value to ‹”” using the twist knob.
This disconnects the appliance from your home network;
the D symbol will go out on the control panel.
Connecting to the network
Connecting to the network
1 Open basic setting ™Š.
2 Touch the p symbol repeatedly until the •’‚ and
¯“£ settings flash alternately.
‹”” will be lit on the hotplate display.
3 Use the twist knob to set the value to
’‹‚, "Connect automatically", or
’‹ƒ, "Connect manually".
4 Follow the instructions in the section entitled
"Automatic login to your home network" or
"Manually logging into your home network".
Connect to the app
If the Home Connect app is installed on your mobile
device, you can connect it to your hob.
Notes
The appliance must be connected to the network.
The app must be open and be set up.
If your extractor hood is directly connected, first
disconnect the hob from your home network and
then initiate the connection process again.
~ "Disconnecting from the network" on page 45,
~ "Connecting to the network" on page 45
1 Open basic setting ™Š.
2 Touch the p symbol repeatedly until the •’ƒ and
˜‘‚ settings flash alternately.
‹”” will be lit on the hotplate display.
3 Set the value to ‹¯ using the twist knob.
4 Launch the app on your mobile device and follow
the instructions in the app to complete the
connection process.
When the value ‹¯ stops flashing on the hotplate
display and the value ‹”” lights up again, the login
process is complete.
W
'
W
W
'
45


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI290 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI290

Gaggenau CI290 User Manual - German - 60 pages

Gaggenau CI290 User Manual - Dutch - 60 pages

Gaggenau CI290 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info