703239
37
Zoom out
Zoom in
Previous page
1/60
Next page
37
Wireless temperature sensor
en
Wireless temperature sensor
Wireless temperature sensor
Before you use the cooking sensor functions for the
first time, connect the wireless temperature sensor to
the control panel.
Preparing and maintaining the
wireless temperature sensor
This section provides information on:
Adhering the silicone patch
Attaching the wireless cooking sensor
Cleaning
Changing the battery
Silicone patches and cooking sensors can be
purchased from specialist retailers, our technical after-
sales service or our official website. Please quote the
relevant reference number when doing so:
Adhering the silicone patch
The silicone patch secures the cooking sensor to the
cookware.
If you are using a pot with the cooking sensor functions
for the first time, attach the silicone patch directly onto
the pot. Proceed as follows:
1 That the adhesive area on the pan is free from
grease. Clean the pan, dry it thoroughly and wipe
the adhesive area with a spirit.
2 Remove the protective film from the silicone patch.
Adhere the silicone patch to the outside of the pan
in the correct place using the enclosed template as
a guide.
3 Press down all over the surface of the silicone
patch, including in the centre.
The adhesive requires one hour to fully harden. Do not
use or clean the pan during this time.
Notes
Do not leave the pan with the silicone patch to soak
soapy water for long periods of time.
If the silicone patch comes off, attach a new one.
Fitting the wireless temperature sensor
Attach the temperature sensor to the silicone patch and
align it correctly.
Notes
Make sure that the silicone patch is completely dry
before attaching the temperature sensor.
Position the cookware in such a way that the
temperature sensor is pointing towards the outer
side of the hob.
To prevent overheating, the temperature sensor
must not be pointed towards another item of
cookware that is hot.
Remove the temperature sensor from the saucepan
after cooking. Store it in a clean, safe place away
from sources of heat.
You can use up to three temperature sensors at the
same time.
Connecting the wireless temperature
sensor to the control panel
To connect the wireless cooking sensor to the control
panel, proceed as follows:
1 Select the basic setting ™†; see the section
entitled ~ "Basic settings"
. The ¨ symbol lights up white.
2 Touch the ¨ symbol. A signal sounds and the ¨
symbol lights up orange. The cooking zone
indicators light up white and the cooking sensor
indicators on the hotplates flash.
Briefly touch the ¨ symbol on the wireless cooking
sensor within the next 30 seconds.
00577921 Set of 5 silicone patches
CA060300 Cooking sensor and set of 5 silicone patches
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI290 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI290 in the language / languages: English as an attachment in your email.

The manual is 1,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI290

Gaggenau CI290 User Manual - German - 60 pages

Gaggenau CI290 User Manual - Dutch - 60 pages

Gaggenau CI290 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info