761563
51
Zoom out
Zoom in
Previous page
1/60
Next page
50
en Hood connection
Control the hood via the hob
In the basic settings of your hob you can adjust the
behaviour of your extractor hood depending on the
switch-on/off of the hob or individual cooking zones.
~ "Hood control settings" on page 50
You can select other settings using the control panel.
Setting the fan
Switching on
Touch the } symbol.
Setting fan level
Turn the twist knob clockwise or anti-clockwise to adjust
the fan setting.
The following settings are possible:
Switching off
To switch the fan off and continue cooking:
1Touch the } symbol.
2Use the twist knob to select the fan setting .
To switch off the hob:
How the fan behaves once the hob is switched off
depends on the basic setting you have selected.
If the ¥ symbol is displayed, the fan is in run-on mode.
Note: Even once the hob and fan have been switched
off, the E symbol will still be faintly visible.
Setting the hood lighting
You can switch the hood light on and off via the hob's
control panel.
Touch the ž symbol.
Depending on the basic settings you have selected, the
light will automatically be switched on or off when the
hob is switched on or off. ~ "Hood control settings"
Hood control settings
You can adapt the hood controls to suit your needs at
any time.
Changing the basic settings ~ "Basic settings"
Note: The ™‘, ™›, ™™ and ™š settings are only
displayed if the appliance is connected to an extractor
hood.
Indicator/
symbol
Function
Fan off
Automatic mode
The fan starts automatically when steam is pro-
duced
, ƒ, Fan settings
Intensity: Low, medium, high
˜PowerBoost function
»Intermittent ventilation
¥Fan run-on
Indicator/
symbol
Function
™“ Hob-to-hood connection
‹”” Not connected*/disconnect.
Connect.
ƒConnected to home network.
‹¯ Connected to extractor hood.
™‘ Automatic fan switch-on
‹”” Switched off.
The hood will need to be switched on
manually if required.
Switched on in automatic mode.*
In automatic mode, the hood switches
itself on when you switch on one of the
cooking zones.
Switched on in manual mode.
The hood switches itself on at the lowest
setting when one of the cooking zones is
switched on.
ƒSwitched on in manual mode.
The hood switches itself on at a medium
setting when one of the cooking zones is
switched on.
Switched on in manual mode.
The hood switches itself on at the highest
setting when one of the cooking zones is
switched on.
™› Fan run-on
‹”” The fan switches itself off when the hob is
switched off.
Switched on in automatic mode.*
‹¯ Switched on with standard fan run-on.
¯‹ Settings cannot be changed.
™™ Switch light on automatically
‹”” Switched off.*
‹¯ Switched on.
The light switches itself on when you
switch on the hob.
™š Switch light off automatically
‹”” Switched off.*
‹¯ Switched on.
The light switches itself off when you
switch off the hob.
* Basic setting
51
Cookware check en
t
Cookware check
Cookware check
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the hotplate being used.
1With the cookware still cold, fill it with approx.
200 ml of water and place it on the centre of the
hotplate with the diameter that most closely
matches that of the base of the cookware.
2Go to the basic settings and select the ™ˆ setting.
3Touch the control panel. A will flash on the hotplate
display.
The function has now been activated.
After 10 seconds, the result for the quality and speed of
the cooking process will appear in the hotplate display.
Check the result using the following table:
To reactivate the function, turn the twist knob.
Notes
The flexible cooking zone only counts as a single
cooking zone; place no more than one item of
cookware on it.
If the diameter of the cooking zone that is used is
much smaller than the diameter of the cookware,
only the middle of the cookware can be expected to
heat up. This may result in the cooking results not
being as good as expected or not being
satisfactory.
You can find information on this function in the
section entitled ~ "Basic settings".
You can find information on the type, size and
positioning of the cookware in the sections entitled
~ "Induction cooking" and ~ "Flex function".
h
Power manager
Power manager
You can use the power manager to set the total power of
the hob.
The hob is preset at the factory. Its maximum
performance is specified on the rating plate. You can
use the power manager to change the value in
accordance with the requirements for the relevant
electrical installation.
In order not to exceed this set value, the hob
automatically distributes the power available between
the cooking zones that are switched on.
As long as the power manager function is activated, the
output of a cooking zone may temporarily fall below the
nominal value. If a cooking zone is switched on and the
power limit is reached, ¬ appears in the heat setting
display for a short time. The appliance automatically
regulates and selects the highest possible power level.
For more information about how the total power of the
hob is changed, see section ~ "Basic settings"
Result
The cookware is not suitable for the hotplate and will
therefore not heat up.*
The cookware is taking longer to heat up than expected
and the cooking process is not going as well as it
should.*
ƒThe cookware is heating up correctly and the cooking
process is going well.
* If there is a smaller hotplate available, test the cookware
again on the smaller hotplate.
X|
É
Y| [|
\|
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI282112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI282112 in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI282112

Gaggenau CI282112 User Manual - German - 60 pages

Gaggenau CI282112 User Manual - Dutch - 60 pages

Gaggenau CI282112 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info