761563
41
Zoom out
Zoom in
Previous page
1/60
Next page
40
en Wireless temperature sensor
Changing the battery
If the temperature sensor does not light up when the
symbol is pressed, the battery is flat.
Changing the battery:
1Remove the silicone cover from the lower section of
the temperature sensor housing and remove both
screws using a screwdriver.
2Open the closure of the temperature sensor.
Remove the battery from the lower section of the
housing and insert a new battery (pay attention to
the correct orientation of the battery poles).
Caution!
Do not use any metal objects to remove the battery.
Do not touch the battery connection points.
3Close the closure of the temperature sensor (the
notches for the screws on the closure must align
with the notches on the lower section of the
housing). Tighten the screws with a screwdriver.
4Reattach the silicone cover to the lower section of
the temperature sensor housing.
Note: Use only high-quality batteries of the type
CR2032 in order to guarantee a long service life.
Declaration of Conformity
Gaggenau Hausgeräte GmbH hereby declares that the
appliance with wireless temperature sensor function
meets the basic requirements and other relevant
provisions of the Directive 2014/53/EU.
A detailed RED Declaration of Conformity can be found
online at www.gaggenau.com on the product page for
appliance in the additional documents.
The logos and the Bluetooth® brand are registered
trademarks and property of Bluetooth SIG, Inc. These
trademarks are used by Gaggenau Hausgeräte GmbH
under licence. All other trademarks and brand names
are owned by the respective companies.
41
Childproof lock en
A
Childproof lock
Childproof lock
Activating and deactivating the
childproof lock
The hob must be switched off.
To activate: Remove the twist knob from the hotplate.A
signal sounds. The H indicator lights up for 10
seconds. The hob is locked.
To deactivate: Place the twist knob on the twistpad.
Note: Removing the twist knob when the hotplate is
switched on initially activates the display cleaning
protection function. If the twist knob is not put back on
after 10 minutes, the hotplate switches itself off and the
child lock is activated.
k
Display cleaning protection
Display cleaning protection
If you wipe over the control panel while the hob is
switched on, settings may be changed. To avoid this, the
hob has a function you can use to lock the control panel
for cleaning.
To activate: Remove the twist knob.
An audible signal sounds. The indicator and the hob
settings flash. The heating process is interrupted. If a
cooking timer is set, it will be paused. The control panel
is locked for 10 minutes.
You can now wipe over the surface of the control panel
without altering the settings.
To deactivate: Put the twist knob back on within
10 minutes.
The control panel is unlocked. The hob continues
operating with the previous settings.
To end the function early, put the twist knob back on
before the 10 minutes have elapsed.
b
Automatic safety cut-out
Automati c safety cut- out
If a hotplate operates for an extended period and no
settings are changed, the automatic safety shut-off is
activated.
The hotplate stops heating. A signal sounds and the
residual heat indicator œ or appears in the hotplate
display.
When you touch any symbol, the display switches off.
The hotplate can now be set again.
The point at which the safety shut-off becomes active
depends on which heat setting has been set (after 1 to
10 hours). .
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI282112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI282112 in the language / languages: English as an attachment in your email.

The manual is 3,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI282112

Gaggenau CI282112 User Manual - German - 60 pages

Gaggenau CI282112 User Manual - Dutch - 60 pages

Gaggenau CI282112 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info