761558

Gaggenau CI262115 Manual

23
Zoom out
Zoom in
Previous page
1/60
Next page
22
en Timer functions
Frying sensor technology for pans/cooking sensor
If you set a cooking time for a cooking zone with
activated frying sensor technology or activated cooking
sensor, the cooking time begins to count down
immediately and not just once the selected temperature
level has been reached.
Changing or deleting the time
Select the hotplate and then touch the 6 symbol.
Change the cooking time using the twist knob or set to
‹‹ to delete it.
When the time has elapsed
The hotplate switches off. A signal sounds, ‹ appears
in the hotplate display and ‹‹ flashes in the timer
display. Touch any symbol or press the twist knob; the
displays go out and the audible signal ceases.
Notes
– If a cooking time has been programmed for several
hotplates, the cooking time that ends first will
appear in the timer display. The 6 indicator for the
hotplate lights up orange.
– Select the relevant hotplate to call up the remaining
cooking time for a hotplate. The cooking time will
appear for 10 seconds.
The short-term timer
You can use the short-term timer to set a time of up to
99 minutes.
This works independently from the hotplates and from
other settings. This function does not automatically
switch off a hotplate.
How to activate the function
1Touch the Š symbol; ‹‹ appears in the timer
display.
2Select the required time using the twist knob.
3Touch the Š symbol again to confirm the selected
time.
The cooking time begins to elapse.
Changing or deleting the time
Touch the Š symbol and use the twist knob to change
the time or set it to ‹‹.
When the time has elapsed
A signal sounds for three minutes. ‹‹ flashes in the
timer display. Touch the Š symbol again: The displays
go out and the audible signal ceases.
Timer plus
If you press and hold the symbol Š for a few seconds
before the audible signal ceases, the stopwatch is
activated.
The display for the stopwatch shows the elapsed time
since the end of the set timer time. The time that was
previously set flashes in the timer display.
Press and hold the Š symbol for a few seconds. This
stops the stopwatch, and the indicators go out.
The function has been deactivated.
Stopwatch function
The stopwatch shows the cooking time that has elapsed
so far in minutes and seconds (mm.ss). The maximum
duration is 99 minutes and 59 seconds (99.59). If this
value is reached, the display starts again at 00.00.
The stopwatch works independently of the hotplates and
other settings. This function does not automatically
switch off a hotplate.
Activating
Touch the ® symbol. ‹‹.‹‹ appears in the stopwatch
display.
The time begins to elapse.
Deactivating
Touching the ® symbol stops the stopwatch function.
The stopwatch displays remain lit.
If you touch the ® symbol again while it is still orange,
the time will continue to elapse.
If you touch and hold the ® symbol, the displays will go
out.
The function is deactivated.
23
Booster function for pots en
v
Booster function for pots
Booster functi on for pots
This function allows large volumes of water to be heated
up even more quickly than with power setting Š. The
saucepan booster function temporarily increases the
maximum output of the selected hotplate.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration).
Note: The booster function can also be activated on the
flexible cooking zone if this is being used as a single
hotplate.
Activating
1Select the hotplate.
2Touch the Ž symbol.
The ˜ indicator lights up.
The function has now been activated.
Deactivating
1Select the hotplate.
2Touch the Ž symbol, turn the twist knob or select a
different function.
The ˜ indicator goes out and the hotplate switches
back to the Š heat setting.
The function is deactivated.
Notes
– In certain circumstances, this function may switch
itself off automatically in order to protect the
electronic elements inside the hob.
– If a heat setting was set before activating function,
this setting will be automatically applied again after
deactivating the function.
v
Booster function for pans
Booster functi on for pans
This function enables you to heat cookware faster than
when using heat setting Š.
After deactivating the function, select the appropriate
heat setting for your food.
This function can always be activated for a hotplate,
provided the other hotplate in the same group is not in
use (see illustration).
Note: The booster function for pans can also be
activated on the flexible cooking zone if this is being
used as a single hotplate.
Recommendations for use
▯Always use cookware that has not been pre-heated.
▯Use pots and pans with a flat base. Do not use
cookware with a thin base.
▯Never leave empty cookware, oil, butter or lard to
heat up unattended.
▯Do not place a lid on the cookware.
▯Place the cookware on the centre of the hotplate.
Ensure that the diameter of the base of the
cookware corresponds to the size of the hotplate.
▯You can find information on the type, size and
positioning of the cookware in section
~ "Induction cooking"
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI262115 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI262115 in the language / languages: English as an attachment in your email.

The manual is 3,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI262115

Gaggenau CI262115 User Manual - German - 60 pages

Gaggenau CI262115 User Manual - Dutch - 60 pages

Gaggenau CI262115 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info