761556
14
Zoom out
Zoom in
Previous page
1/24
Next page
14
en Timer functions
O
Timer functions
Timer functi ons
Your hob has two timer functions:
Cooking timer
Short-term timer
Cooking timer
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1Select the hotplate and the required heat setting.
2Touch the 0 symbol. x lights up in the display for
the hotplate. ‹‹ lights up in the timer display.
3Within the next 10 seconds, select the required
cooking time in the control panel
After a few seconds, the time begins to elapse.
Note: The same cooking time can be set automatically
for all hotplates. The set time for each of the hotplates
counts down independently.
You can find information on automatically programming
the cooking time in section ~ "Basic settings"
Changing or deleting the time
Select the hotplate and then touch the 0 symbol.
To delete the cooking time, change the cooking time in
the control panel or set it to ‹‹ .
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The
time program function lights up ‹‹ for 10 seconds in
the display.
When the 0 symbol is pressed, the indications turn off
and the beeping stops.
Notes
If a cooking time was programmed for several
hotplates, the time information for the selected
hotplate is shown in the timer display.
Select the relevant hotplate to call up the remaining
cooking time.
You can set a cooking time of up to ŠŠ minutes.
The short-term timer
You can use the short-term timer to set a time of up to
99 minutes.
This works independently from the hotplates and from
other settings. This function does not automatically
switch off a hotplate.
Programming
1Press the 0 symbol several times until the
V indicator lights up. ‹‹ appears in the time
programming function display.
2Use the ó to ê buttons to set the required time.
After a few seconds, the time begins to elapse.
Changing or deleting the time
Press the 0 symbol several times until the V indicator
lights up.
Adjust the time in the control panel or set it to ‹‹ to
end the timer.
When the time has elapsed
An audible signal sounds. ‹‹ flashes in the time
programming function display and the "on" timeV lights
up. The indicators switch off after 10 seconds.
Press the 0 symbol to switch off the indicators.
 
[|
\|
[|
\|
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau CI261114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau CI261114 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau CI261114

Gaggenau CI261114 User Manual - German - 28 pages

Gaggenau CI261114 User Manual - Dutch, Italian - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info