14
• Important! Only operate the appliance with all
parts dry. Damp burner parts will cause
malfunctions when igniting or unstable flames.
After prolonged operation, the burners (burner
head cover, burner ring and burner head) will
become darker through natural oxidation. You
can remove this discoloration as follows:
Mix equal parts of white vinegar with a max. 8 %
acid (household vinegar) and warm water.
Soak the discolored burner parts for no longer than
10 minutes in the solution and remove stubborn
stains with a cloth or sponge.
Rinse the burner parts thoroughly in clear water and
dry completely before use.
Note: The surface will be damaged if the
solution is too concentrated or the burner
parts are left in vinegar for too long!
Part / Material Suggested Cleaning Procedure Important Reminders
Control Knobs Wipe with a damp cloth. Cloth should not be too wet, as moisture
could penetrate behind the control knob.
Pot Grid Take pot grids off for cleaning. Do not clean in a dishwasher.
(enamel on Soak in sink. Clean with detergent Soak burnt-in remainders in sink.
cast iron) and brush. Abrasive cleaners, used too vigorously or
too often can eventually mar the enamel.
see next page
