332143
20
Zoom out
Zoom in
Previous page
1/24
Next page
20
activation of the cooking zone extension will not be
r
ecorded.
If you store a memory event for the roasting zone,
f
irst select either of the right cooking zones.
Activate the roasting zone extension within
30 seconds after selecting the cooking zone.
The automatic quick boil function cannot be
activated for memory cooking.
The automatic switch off (holiday safeguard) can
also be activated while using memory cooking.
Changing the setting
If you want to store a different memory event for a
cooking zone, make a new recording. The old
memory is erased.
Calling up the memory
If you want to cook a dish again for which the
setting has been recorded, call up the memory.
The hob must be switched on.The cooking zone for
which the memory function is to be activated must
be switched off.
1 Select the required cooking zone with the twist
knob.
2 Touch the M symbol to activate the memory.
The stored settings appear in the cooking zone
display in quick succession. The cooking zone does
not heat up yet. The M symbol next to the cooking
zone display lights up. Each individual step appears
in the display for 3 seconds. The respective
cooking times appear in the timer display.
After all the steps have been displayed, the memory
program starts. The cooking zone heats up. The
current setting is displayed in the cooking zone
display. The duration of the whole cooking event
counts do
wn in t
he timer displa
y
.
If y
ou w
ant t
o call up t
he memory event for the
r
oas
ting zone, fir
s
t select t
he cooking zone on the
right that you used to store the memory event. The
r
emaining right cooking zone mus
t be switc
hed off.
Then t
ouch t
he
M symbol.
Displaying the memory
Y
ou can call up the remaining heat settings and the
respective cooking times while the memory program
is running.
1 Select the cooking zone with the twist knob.
2 Touch the W symbol to display the current heat
setting and duration. You can now call up all
the remaining heat settings and the respective
durations using the W symbol.
Memory ends
When the memory program has finished, the
cooking zone switches off. A signal sounds for
3 minutes.
00 flashes in the timer display. The
M symbol flashes next to the cooking zone display.
0 lights up in the cooking zone display. Touch any
control panel. The displays disappear and the
signal stops.
Ending t
he memory prematurely
Select the cooking zone with the twist knob. The
cooking zone display flashes. Change the heat
setting. The memory operation is ended. The
cooking zone switches off.
Several cooking zones in memory
operation
If you want to use the memory function on several
cooking zones at the same time, the shortest
duration of the memory pr
ograms is displayed in the
timer display.
If you w
ould lik
e t
o call up t
he dur
ation of another
memory program: Select the cooking zone with the
twis
t knob. The current setting is displayed.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau ce 492 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau ce 492 in the language / languages: English as an attachment in your email.

The manual is 1,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau ce 492

Gaggenau ce 492 User Manual - German - 24 pages

Gaggenau ce 492 User Manual - Dutch - 24 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info