755787
23
Zoom out
Zoom in
Previous page
1/56
Next page
22
en Automatic programmes
Selecting a dish
The following categories are available. One or more
dishes are listed beside each category.
Note: The last selected category is displayed in the first
position.
Categories:
Meat and poultry
Fish
Vegetables
Side and oven dishes
Dessert
Bread and pastries
Raising dough
Regenerating
Defrosting
Applying settings for a dish
You are guided through the entire setting process.
Follow the instructions in the display.
Use the rotary selector to scroll through the individual
levels.
1Set the function selector to ž.
2Touch the i symbol. Press to confirm.
3Use the rotary selector to select the category and
press to confirm.
4Use the rotary selector to select the required dish
and press to confirm.
The possible settings appear in the display. For
many dishes, you can change the settings to suit
your needs.
For some dishes, you must set the weight.
Tip: By pressing the * symbol, you can receive
information about accessories and preparation
methods.
5Press to confirm the required settings. Follow
the directions in the display.
Once the cooking time has elapsed, the appliance stops
heating up and steam removal takes place. An audible
signal sounds.
Opening the appliance door affects the cooking result.
Open the appliance door only briefly. The automatic
programme is interrupted and continues to run after
closing the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears in the display asking if you want to
continue cooking.
1Press to confirm.
2Select a single or double cooking time, depending
on requirements.
3Press I to start.
4If the "Continue cooking" function has ended, turn
the function selector to 0.
Note: If you touch the ¡ symbol during continued
cooking, the steam removal and the continue cooking
function is ended.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you want to cancel the operation, turn the function
selector to 0.
Calling up the last automatic
programmes used
The last five dishes with the selected settings are saved.
You have the option of saving these dishes with the
selected settings as individual recipes. You can no
longer retroactively change the settings of individual
recipes if you have not saved it using the "Last
automatic programmes" function.~ "Individual recipes"
on page 23
1Set the function selector to ž.
i is displayed.
2Touch the i symbol.
3Use the rotary selector to select "Last automatic
programmes" and press to confirm.
4Use the rotary selector to select the required dish
and press to confirm.
5Enter a name for the dish and save. ~ "Entering
names" on page 24
23
Individual recipes en
Ž
Individual recipes
Individual recipes
It is possible to save up to 50individual recipes. You
can record a recipe. These recipes can be given a name
so that they can be called up quickly and conveniently
when required.
Recording a recipe
It is possible to set up to 5phases consecutively while
recording at the same time.
1Set the function selector to ž.
2Touch the i symbol.
3Use the rotary selector to select "Individual recipes"
and press to confirm.
4Use the rotary selector to select a free memory
location.
5Touch the g symbol.
6Use the rotary selector to set the required
temperature.
7The cooking time will be recorded.
8To record another phase:
Turn the function selector to the required type of
heating. Use the rotary selector to set the required
temperature. This will start a new phase.
9Once you have obtained the cooking result you
want for the dish, touch the & symbol to finish the
recipe.
10 Enter a name for the recipe in "ABC". ~ "Entering
names" on page 24
Notes
The appliance will not start recording a phase until
it has reached the set temperature.
Each phase must last at least 1minute.
During the first minute of a phase, you can change
the type of heating or the temperature.
Programming a recipe
You can programme and save up to 5preparation
phases.
1Set the function selector to ž.
2Touch the i symbol.
3Use the rotary selector to select "Individual recipes"
and press to confirm.
4Use the rotary selector to select a free memory
location.
5Touch the % symbol.
6Enter a name for the recipe in "ABC". ~ "Entering
names" on page 24
7Use the C symbol to select the first phase.
The initial type of heating and temperature are
displayed. You can change the type of heating and
the temperature using the rotary selectors.
8Use the C symbol to select the time setting.
9Set the required cooking time using the rotary
selector.
10 Use the C symbol to select the next phase.
- or -
If preparation is complete, finish making entries.
11 Save with .
- or -
Cancel with ' and exit the menu.
To set the core temperature for a phase:
Use the C symbol to select the next phase. Set the
heating function and temperature. Touch the + symbol.
Use the rotary selector to set the desired core
temperature and press + to confirm.
Note: Cooking time cannot be set for phases with a
programmed core temperature.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BSP270111 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BSP270111 in the language / languages: English as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BSP270111

Gaggenau BSP270111 User Manual - German - 56 pages

Gaggenau BSP270111 User Manual - Dutch - 64 pages

Gaggenau BSP270111 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info