755791
10
Zoom out
Zoom in
Previous page
1/56
Next page
10
en Familiarising yourself with your appliance
Standby
The appliance switches to standby mode if no function
is set or the childproof lock is activated.
The brightness of the control panel is dimmed in
standby mode.
Notes
Different things can be displayed in standby mode.
The default setting is the GAGGENAU logo and the
time.
The brightness of the display depends on the
vertical viewing angle.
You can change the display and the brightness at
any time in the basic settings.
Activating the appliance
To exit standby mode, you can either
Turn the function selector,
Touch a control panel,
Or open or close the door.
You can now set the desired function. You can read
about how to set functions in the respective chapters.
Notes
When "Standby screen = off" is selected in the
basic settings, you must turn the function selector
to exit standby mode.
The appliance returns to the standby screen if you
have not made any settings for a long time after
activation.
The appliance rinses automatically after every
cooking process. The appliance rinses
automatically before each cooking process if it has
not been operated for more than 100 hours.
When the door is open, the interior lighting
switches off after a short time.
Additional information ( and )
By touching the ( symbol, you can call up additional
information. For example, information on the type of
heating set or on the current temperature of the cooking
compartment.
Note: During continuous operation after heating up,
slight deviations in temperature are normal.
The ) symbol appears for important information and
indicates that an action is required. Important
information on safety and operating status is also
occasionally displayed automatically. These messages
disappear automatically after a few seconds or must be
confirmed with .
With Home Connect messages, the Home Connect
status additionally appears in the ). You will find more
information about this in the section entitled ~ "Home
Connect" on page 29.
Cooling fan
Your appliance has a cooling fan. The cooling fan
switches on when the appliance is in operation. The hot
air escapes above the door.
After removing your food from the appliance, keep the
door closed until the appliance has cooled down. The
appliance door must not be left half open as this may
damage adjacent kitchen units. The cooling fan
continues running for a certain period after the
appliance has stopped heating; afterwards, it switches
itself off automatically.
Caution!
Do not cover the ventilation slots. Otherwise, the
appliance may overheat.
Drying the cooking compartment
After operation with a steam function, the cooking
compartment is damp. The cooling fan and the fan
wheel on the back wall of the cooking compartment
continue to run for a while after the appliance is
switched off and then switch off automatically. This may
take up to 95 minutes. The appliance door must remain
closed while the cooking compartment is being dried.
Zoom The setting that you are changing
will appear larger on the display.
If you have set a time and it is about
to run out, it will appear larger on
the display just before it runs out
(e.g. 60seconds before the end, if
you have set the timer).
Pared-down
display
After a short while, the amount of
information shown on the display
will be reduced and only the most
important information will
remain.This function is pre-set and
can be changed in the basic
settings.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BSP261101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BSP261101 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BSP261101

Gaggenau BSP261101 User Manual - German - 56 pages

Gaggenau BSP261101 User Manual - Dutch - 60 pages

Gaggenau BSP261101 User Manual - French - 64 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info