755814
19
Zoom out
Zoom in
Previous page
1/56
Next page
18
en Time-setting options
Safety shut-off
For your protection, the appliance is equipped with an
automatic safety shut-off. Any heating process is
switched off after 12 hours if the oven is not operated in
this time. A message appears in the display.
Exception:
The long-term timer has been programmed.
Set the function selector to 0, then the appliance can be
operated again as usual.
O
Time-setting options
Time-setting options
You use the timer menu to make the following settings:
Š Short-term timer
p Stopwatch
6 Cooking time (not in standby mode)
5 Cooking time end (not in standby mode)
Calling up the timer menu
You can call up the timer menu from any mode. Only
from the basic settings, function selector is set to S, the
timer menu is not available.
Touch the M symbol.
The timer menu is displayed.
Timer
The timer runs independently of the other appliance
functions. You can enter a maximum of 90 minutes.
Setting the timer
1Call up timer menu.
The "Timer" Š function is displayed.
2Turn the rotary selector to set the required cooking
time.
3Start with I.
6KRUWWHUPWLPHU

19
Time-setting options en
The timer menu closes and the time begins to count
down. The Š symbol and the countdown appear in the
display.
A signal sounds once the time has elapsed. Touch the
symbol to silence.
You can exit the timer menu at any time by pressing the
' symbol. This erases the settings.
To stop the timer:
Call up timer menu. Touch C to select the "Timer" Š
function and touch the H symbol. To allow the timer to
continue counting down, touch the symbol I.
Switching off the timer early:
Call up timer menu. Touch C to select the "Timer" Š
function and touch the Ž symbol.
Stopwatch
The stopwatch runs independently of the other
appliance functions.
The stopwatch counts from 0seconds up to 90 minutes.
It also has a pause function, which enables you to
temporarily stop the clock.
Starting the stopwatch
1 Call up the timer menu.
2 Touch C to select the p "Stopwatch" function.
3 Touch I to start.
The timer menu is closed and the timing begins. The p
symbol and the elapsed time are shown in the display.
Pausing and restarting the stopwatch
1 Call up the timer menu.
2 Touch C to select the p "Stopwatch" function.
3 Touch the H symbol.
The time stops. The symbol changes to I Start.
4Touch I to start.
The time continues to run. When 90minutes is reached,
the display pulsates and signal sounds. The signal stops
when you touch the symbol. The p symbol on the
display goes out. The process has finished.
To switch off the stopwatch:
Call up the timer menu. Touch C to select the p
"Stopwatch" function and touch the Ž symbol.
Cooking time
If you set a cooking time for your meal, the appliance
switches off heating automatically after the selected
time.
You can set a cooking time from 1 minute to 23 hours
59 minutes.
Setting the cooking time
You have set the type of heating and temperature and
placed your food in the cooking compartment.
1Touch the M symbol.
2Use C to select the 6 "Cooking time" function.

6WRSZDWFK


6WRSZDWFK

19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BSP251101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BSP251101 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BSP251101

Gaggenau BSP251101 User Manual - German - 56 pages

Gaggenau BSP251101 User Manual - Dutch - 60 pages

Gaggenau BSP251101 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info