755812
14
Zoom out
Zoom in
Previous page
1/56
Next page
14
en Before using for the first time
K
Before using for the first time
Before using for the f i rst time
In this section, you can find out what you must do
before using your appliance to prepare food for the first
time. First read the section entitled ~ "Important
safety information" on page 5.
The appliance must be fully installed and connected to
the mains.
After connecting the appliance to the power supply, the
"Initial settings "menu will be displayed. Now you can
now configure your new appliance for initial set-up.
Notes
The "Initial settings" menu will appear only after the
appliance has been connected to a power supply
and switched on for the first time, or if the
appliance has not been connected to a power
supply for a number of days.
Once the appliance has been connected to a power
supply, the GAGGENAU logo will appear first for
approximately 30seconds. The "Initial settings"
menu will then appear automatically.
You can change the settings at any time in the basic
settings.
Setting the language
The preset language appears in the display.
1Turn the rotary selector to select the required
display language.
2Confirm with .
Setting the time format
The two possible formats 24h and AM/PM appear in the
display. The default is the 24h format.
1Use the rotary selector to select the desired format.
2Confirm with .
Setting the clock
The time is shown in the display.
1Set the desired time using the rotary selector.
2Confirm with .
Setting the date format
The three possible formats D.M.Y, D/M/Y and M/D/Y
appear in the display. The default is the D.M.Y format.
1Use the rotary selector to select the desired format.
2Confirm with .
Setting the date
The preset date appears in the display. The day setting
is already active.
1Set the day using the rotary selector.
2Touch the C symbol to switch to the month setting.
3Set the month using the rotary selector.
4Touch the C symbol to switch to the year setting.
5Set the year using the rotary selector.
6Confirm with .
Setting the temperature unit
The two possible units °C and °F will appear on the
display. The default unit is °C.
1Use the rotary selector to select the unit you
require.
2Confirm with .
Setting the water hardness
"Water hardness" appears in the display.
1Check the mains water with the included carbonate
hardness test: fill the small measurement tube with
mains water up to the 5 ml mark.
2Add drops of indicator solution until the color
changes from purple to yellow.
Important: count the drops and carefully swing the
measurement tube after every drop until the liquids
have mixed thoroughly. The number of drops
corresponds to the water hardness.
3Use the rotary selector to set the measured water
hardness. The value 12is set by default.
4Confirm with .
Ending initial set-up
"Initial set-up complete" will appear on the display.
Confirm with .
The appliance will switch to standby mode and the
standby display will appear. The appliance is now ready
to use.
Grease filter
Hook the enclosed grease filter onto the two bolts on
the back wall of the cooking compartment. Ensure that
you do not scratch the back wall when doing so.
Leave the grease filter in the cooking compartment for
all applications. Clean the grease filter with hot soapy
water or in the dishwasher every time heavy dirt
deposits have been left behind after cooking.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BSP250101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BSP250101 in the language / languages: English as an attachment in your email.

The manual is 3,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BSP250101

Gaggenau BSP250101 User Manual - German - 56 pages

Gaggenau BSP250101 User Manual - Dutch - 60 pages

Gaggenau BSP250101 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info