755839

Gaggenau BSP221131 Manual

17
Zoom out
Zoom in
Previous page
1/40
Next page
16
en Time-setting options
The timer menu is closed and the timing begins. The p
symbol and the elapsed time are shown in the display.
Pausing and restarting the stopwatch
1 Call up the timer menu.
2 Touch C to select the p "Stopwatch" function.
3 Touch the H symbol.
The time stops. The symbol changes to I Start.
4Touch I to start.
The time continues to run. When 90minutes is reached,
the display pulsates and signal sounds. The signal stops
when you touch the ™ symbol. The p symbol on the
display goes out. The process has finished.
To switch off the stopwatch:
Call up the timer menu. Touch C to select the p
"Stopwatch" function and touch the Ž symbol.
Cooking time
If you set a cooking time for your meal, the appliance
switches off heating automatically after the selected
time.
You can set a cooking time from 1 minute to 23 hours
59 minutes.
Setting the cooking time
You have set the type of heating and temperature and
placed your food in the cooking compartment.
1Touch the M symbol.
2Use C to select the 6 "Cooking time" function.
3Set the required cooking time using the rotary
selector.
4Press I to start.
The appliance starts. The Timer menu closes. The
display shows the temperature, operating mode,
remaining cooking time and cooking time end.
One minute before the end of the cooking time, the
elapsed cooking time is shown enlarged on the display.
Once the cooking time has elapsed, the appliance
switches off. The 6 symbol flashes and an audible
signal sounds. The signal stops early if you touch the ™
symbol, open the appliance door, or set the function
selector to 0.
Changing the cooking time:
Call up the Timer menu. Use C to select the 6
"Cooking time" function. Use the rotary selector to
change the cooking time. Press I to start.
To cancel the cooking time:
Call up the Timer menu. Use C to select the 6
"Cooking time" function. Cancel the cooking time with
Ž. Press ' to return to normal operation.
To cancel the entire procedure:
Set the function selector to 0.
Note: You can also change the type of heating and
temperature while the cooking time elapses.

6WRSZDWFK

&RRNLQJWLPH
17
Time-setting options en
End of cooking time
You can delay the cooking time end to a later time.
Example: it is 14:00. The dish requires a cooking time of
40minutes. You want it to be ready at 15:30.
Enter the cooking time and delay the cooking time end
until 15:30. The electronics system calculates the start
time. The appliance starts automatically at 14:50and
switches off at 15:30.
Bear in mind that food which spoils easily should not be
left in the cooking compartment for too long.
Delaying the cooking time end
You have set the type of heating, temperature and
cooking time.
1Touch the M symbol.
2Use C to select the 5 "Cooking time end" function.
3Set the required cooking time end using the rotary
selector.
4Press I to start.
The appliance switches to standby. The display shows
the operating mode, temperature, cooking time and
cooking time end. The appliance starts at the calculated
time and automatically switches off once the cooking
time has elapsed.
Note: If the 6 symbol flashes, you have not set a
cooking time. Always begin by setting a cooking time.
Once the cooking time has elapsed, the appliance
switches off. The 5 symbol flashes and an audible
signal sounds. The signal stops early if you touch the ™
symbol, open the appliance door or set the function
selector to 0.
Changing the cooking time end:
Call up the Timer menu. Use C to select the 5
"Cooking time end" function. Set the required cooking
time end using the rotary selector. Press I to start.
To cancel the entire procedure:
Set the function selector to 0.
&RRNLQJWLPHHQG


… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BSP221131 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BSP221131 in the language / languages: English as an attachment in your email.

The manual is 2,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BSP221131

Gaggenau BSP221131 User Manual - German - 40 pages

Gaggenau BSP221131 User Manual - Dutch - 44 pages

Gaggenau BSP221131 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info