512379
14
Zoom out
Zoom in
Previous page
1/56
Next page
14
4 Turn the rotary selector to select the capacity of the
filter cartridge (between 100 - 9000 litres). Refer to
the instructions included with the filter cartridge.
5 Confirm with .
Setting the water hardness
"Water hardness" appears in the display.
1 Check the mains water with the included carbonate
hardness test: fill the small measurement tube with
mains water up to the 5 ml mark.
2 Add drops of indicator solution until the color
changes from purple to yellow.
Important: count the drops and carefully swing the
measurement tube after every drop until the liquids
have mixed thoroughly. The number of drops
corresponds to the water hardness.
3 Use the rotary selector to set the measured water
hardness. The value 12 is set by default.
4 Confirm with .
Ending initial set-up
"Initial set-up complete. Please calibrate the appliance
before first cooking." appears in the display.
Confirm with .
The appliance enters standby mode and the standby
screen appears. The appliance is now ready for
operation.
Calibrate the appliance before steaming for the first
time. The appliance sets the boiling point.
Calibration
The boiling point of water depends on barometric
pressure. As air pressure drops with increasing
elevation, the boiling point drops as well. During
calibration, the appliance sets the boiling point to the
pressure conditions at the place where it is installed.
It is important that the appliance steams without
interruption for 20 minutes at 100°C. Do not open the
appliance door during this time.
Notes
Calibrate the appliance only when it is cold.
During calibration, the appliance generates more
steam than it normally would do.
1 Turn the function selector to S.
2 Select "Basic settings" using the rotary selector.
3 Touch the symbol.
4 Select "Calibration" using the rotary selector.
5 Touch the % symbol.
6 Remove all accessories from the oven interior and
touch the symbol.
7 The duration of 20:00 minutes appears. Touch I to
start calibration.
Calibration begins. The elapsing time is shown on the
display.
Note: Do not interrupt calibration. Do not turn the
function selector. Do not open the appliance door.
:DWHUILOWHU
$YDLODEOH
:DWHUKDUGQHVV

3OHDVHFDOLEUDWHWKHDSSOLDQFH
EHIRUHILUVWFRRNLQJ
,QLWLDOVHWXSFRPSOHWH
&DOLEUDWLRQ

&$/

&$/
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BS485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BS485 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BS485

Gaggenau BS485 User Manual - German - 48 pages

Gaggenau BS485 User Manual - Dutch - 48 pages

Gaggenau BS485 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info