755824
37
Zoom out
Zoom in
Previous page
1/60
Next page
37
Cleaning and maintenance en
Starting the cleaning programme
1Set the function selector to S.
2The ¢ symbol is displayed. Press to confirm.
3The switch-off time at which the cleaning
programme will end is displayed. If required, you
can alter the switch-off time using the rotary
selector. Press to confirm. The starting time and
switch-off time are altered but the cleaning time
remains the same.
4Take all accessories out of the cooking
compartment and remove the worst of the food
remnants. Press to confirm.
5Remove the cap from the cleaning cartridge.
Caution!
Do not remove the wax plug from the opening of the
cleaning cartridge. Do not use any other cleaning
products. Do not use cartridges if they are
damaged.
6Screw the cleaning cartridge (a) fully into the
socket in the top of the cooking compartment.
Close the appliance door. Press to confirm. A
cleaning time of 3 hours 45 minutes is displayed.
7Press I to start. The cleaning time counts down in
the display. The light in the cooking compartment
remains switched off. The appliance door remains
locked.
Once the cleaning programme has finished, an
audible signal sounds. The appliance door is
unlocked. A message appears in the display.
8Remove the cleaning cartridge.
Caution!
Risk of damage to the cooking compartment: Never
heat the appliance while a cartridge is still in place.
9Turn the strainer filter in the cooking compartment
floor anticlockwise and remove it. Remove any food
remnants from the strainer filter. Rinse it out under
running water.
10 Insert the strainer filter and turn it clockwise as far
as it will go. Press to confirm.
The cleaning programme has now ended. Allow the
appliance to cool down. Then polish the cooking
compartment and the glass with a soft cloth.
Note: The final rinse may leave white streaks in the
cooking compartment and on the glass after drying. This
depends on the water hardness. Remove the white
streaks with a damp cloth.
Dispose of the empty cleaning cartridge along with your
household waste in accordance with the regional
regulations.
Causes of an unsatisfactory cleaning result
If the cooking compartment is still not clean once the
cleaning programme has ended, use the table below to
help you identify the causes. Then insert a new cleaning
cartridge and start the cleaning programme again.
(QGRIFOHDQLQJ



D

Possible cause Solution
Locking cap on the
cleaning cartridge
The locking cap has not been
removed from the cleaning car-
tridge.
Once the cleaning programme has
ended, remove the cartridge from
the appliance. Do not reuse the car-
tridge. Dispose of the cartridge in
accordance with the local regula-
tions.
mWarning – Risk of injury!
To prevent the detergent from
coming into contact with your skin
or eyes, do not remove the locking
cap from a spent cartridge.
Strainer filter not
inserted
The strainer filter must remain
inserted in the cooking compart-
ment floor while the cleaning pro-
gramme is in progress.
E
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BS475112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BS475112 in the language / languages: English as an attachment in your email.

The manual is 2,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BS475112

Gaggenau BS475112 User Manual - German - 60 pages

Gaggenau BS475112 User Manual - Dutch - 60 pages

Gaggenau BS475112 User Manual - French - 64 pages

Gaggenau BS475112 Installation Guide - All languages - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info