512382
33
Zoom out
Zoom in
Previous page
1/56
Next page
33
Drying programme
With the drying program, you can dry the cooking
compartment after cleaning or after steaming.
The drying program takes 20 minutes.
Starting the drying program
1 Remove accessories from the cooking
compartment. Wipe out the cooking compartment.
Thoroughly remove residues of cleaner. Close the
appliance door.
2 Set the function selector to S. Select the drying
program with the rotary selector.
3 The j symbol is displayed. Touch to confirm.
4 The drying time of 20 minutes appears. Touch I to
start. The drying time elapses on the display. The
lamp in the cooking compartment stays off.
5 A signal sounds after 20 minutes. A message
appears in the display. Touch to confirm.
The drying programme has ended. Allow the appliance
to cool down. Then polish the cooking compartment and
the panel with a soft cloth.
Descaling programme
Regular descaling keeps the cooking compartment in
good condition. The descaling programme descales,
rinses and dries the cooking compartment fully
automatically.
Depending on the type of water and your use of the
appliance, a message on the display will remind you to
run the descaling programme. If necessary (e.g. if there
are traces of limescale in the cooking compartment),
you can run the descaling programme more frequently.
The descaling programme takes 2 hours and 15 minutes
from beginning to end.
You need special descaling cartridges for the descaling
programme. These are available from the after-sales
service or from our online shop (CL S20 040 set with
four descaling cartridges, part number 00311768).
Caution!
Damage to the cooking compartment: Use descaling
cartridges for the descaling programme only. Never
place descaling cartridges in the cooking compartment
when it is hot or heat them up in the cooking
compartment.
Notes
The descaling programme cannot be started until
the appliance has cooled down to below 40 °C.
Remove all accessories from the cooking
compartment before starting the descaling
programme (rack, cookware, core temperature
probe).
The drain filter must remain inserted in the cooking
compartment floor while the descaling programme
is in progress.
The appliance door is locked while the descaling
programme is in progress.
Always allow the descaling programme to run to the
end. The descaling programme cannot be
cancelled.
Depending on the water type and your use of the
appliance, descaling may be still be required even if
you use the water descaling system (special
accessory GF 111 100). A message will appear on
the display to remind you of this.
Drain filter not inserted The drain filter must remain
inserted in the cooking compart-
ment floor while the cleaning pro-
gramme is in progress.
Power cut Following a power cut that lasts
longer than 3 minutes, the cleaning
programme will be ended with a
short programme.
Stubborn burnt-on food
residues
Run the cleaning programme again
to remove stubborn food residues.
Possible cause Solution
'U\LQJSURJUDPPH

_
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BS470610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BS470610 in the language / languages: English as an attachment in your email.

The manual is 1,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BS470610

Gaggenau BS470610 User Manual - German - 48 pages

Gaggenau BS470610 User Manual - Dutch - 48 pages

Gaggenau BS470610 User Manual - French - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info