512401
31
Zoom out
Zoom in
Previous page
1/44
Next page
31
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
m Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
--------
Disruption Possible cause Solution
Appliance not working, no display Plug not inserted Connect the appliance to the electricity
mains
Power failure Check whether other kitchen appliances
are working
Fuse defective Check in the fuse box whether the fuse
for the appliance is in working order
Operating error Switch off the fuse for the appliance in
the fuse box and switch it on again after
about 60 seconds
Appliance cannot be started Appliance door is not quite closed Close appliance door
The appliance is not working and the
display does not respond. 0 appears
on the display
Childproof lock activated Deactivate the childproof lock (see sec-
tion entitled 'Childproof lock')
Appliance switches off on its own Safety shut-off: the appliance has not
been operated for longer than 12 hours
Confirm the message with , switch off
the appliance and set it again.
Appliance does not heat up, ° appears
in the display
Appliance is in demo mode Deactivate the demo mode in the basic
settings
The appliance cannot be started, the
display shows an error message
The water tank is empty Fill the water tank
No steam visible in the oven Steam above 100°C is invisible This is normal
A lot of steam escapes at the top of the
door
Appliance is calibrating the boiling point
or is preheating or the heating mode has
been changed
This is normal
The appliance has not yet been cali-
brated
Calibrate the appliance
A lot of steam escapes at the side of the
door
Door seal soiled or loose Clean the door seal and insert it in the
groove
There is a "pop" noise during cooking Cold/warm effect with frozen food,
caused by the steam
This is normal
The appliance is not producing steam
properly
Limescale has formed in the appliance Start the descaling programme
Error message "Exxx" If an error message is displayed, turn
the function selector to 0; if the display
goes out, there was a non-recurring
problem. If the error occurs repeatedly
or the display remains on, please con-
tact the after-sales service and inform
them of the error code.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BS455110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BS455110 in the language / languages: English as an attachment in your email.

The manual is 1,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BS455110

Gaggenau BS455110 User Manual - German - 44 pages

Gaggenau BS455110 User Manual - Dutch - 44 pages

Gaggenau BS455110 User Manual - French - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info