48
To keep your appliance in good working order, you
have to descale the side plate regularly, if no Brita
descaling sytem WF 040-020 has been installed in
the water supply.
Descale the oven when the descaling symbol
n
appears on the display.
Leave the oven to cool down completely before
descaling!
Be careful not to scratch the oven interior when
removing the side plate. Small parts might fall into
the base strainer. Tip: put a kitchen cloth over the
oven base.
Only use the descaler recommended by our after-
sales service (order number 311 138). Other
descalers may damage the appliance. Mix a
descaling solution of 500 ml of water and 100 ml of
descaler. Do not let the descaler come into contact
with the frame of the oven.
Do not use any scouring or abrasive cleaning
agents to clean the side plate.
How to Proceed
1 Pull out the left rack after undoing the knurled
nut on the front side.
2 Detach the grease filter in the upward direction.
3 Undo the forward bolt with a socket spanner
(13 mm). Depending on the version of
appliance, also undo the rear bolt with a socket
spanner (13 mm). Remove the side plate and
descale it.
4 If neccessary remove scale build-up inside the
oven compartment with descaling solution.
Rinse thoroughly any descaling solution with
clear water.
5 Re-insert the side plate. Re-attach the grease
filter and the racks.
6 Check that all parts are fitted securely .
7 Reset the descaling symbol in the basic
settings.
Descaling
