702517
22
Zoom out
Zoom in
Previous page
1/48
Next page
22
en Home Connect
If the display shows "Network connection successful",
the connection process is complete. Follow the
instructions in the app.
Connecting the appliance to the app
Connect your appliance to the app when setting up
Home Connect or connect your appliance to an
additional Home Connect account. The Home Connect
app can be installed on any number of mobile devices,
which can then be connected to the appliance.
Requirements:
The appliance is connected to the home network.
The Home Connect app has been installed on the
mobile device.
1 To connect an additional account, select "Home
Connect" in the basic settings.
2 Use the rotary selector to select "Connect to app".
3 Touch the % symbol and start the connection
process with .
4 Follow the instructions in the app.
If the display shows "Connection to app successful", the
connection process is complete.
Remote Start
Remote start must be activated in order to start and
operate your appliance via the Home Connect app. If
remote start is deactivated, the Home Connect app will
only show the operating modes of the appliance and let
you configure the settings.
Remote start is automatically deactivated in the
following situations:
The oven door is opened at least 15 minutes after
remote start has been activated.
The oven door is opened at least 15 minutes after
the oven has finished.
24 hours after remote start has been activated.
When you start a heating mode using the controls on
the appliance itself, remote start is activated
automatically. You can now make changes or start a new
programme from your mobile device.
Activating remote start
1 Set the function selector to ž
2 Touch the × symbol.
The symbol × appears next to the ( symbol.
Remote start is activated. You can now start a heating
mode via the app on the mobile device and send the
desired settings to the appliance.
Touch the í symbol to deactivate remote start.
Home Connect settings
Home Connect can be adapted to your specific needs at
any time.
Note: You will find the Home Connect settings in the
basic settings for your appliance. Which settings the
display shows will depend on whether Home Connect
has been set up and whether the appliance is
connected to your home network.
Basic setting Permitted settings Explanation
Connection type LAN/WLAN You can switch between connection types (LAN cable and
WLAN).
Follow the instructions for the relevant connection type in the
section entitled "Setting up".
Connection Connect/disconnect Switch the network connection on or off as required (e.g. for
holidays).
The network information will be retained after the appliance is
switched off. After switching on the appliance, you will need
to wait for a few seconds while it reconnects to the network.
In networked standby mode, the appliance requires max. 2 W.
Connect to app Start the connection process between the app and the appli-
ance.
Software update Whenever a new software version is available, Í will appear
in the Home Connect menu.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BOP221101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BOP221101 in the language / languages: English as an attachment in your email.

The manual is 1,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BOP221101

Gaggenau BOP221101 User Manual - German - 48 pages

Gaggenau BOP221101 User Manual - Dutch - 48 pages

Gaggenau BOP221101 User Manual - French - 52 pages

Gaggenau BOP221101 Installation Guide - All languages - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info