701076
27
Zoom out
Zoom in
Previous page
1/48
Next page
27
Catalytic cleaning (cleaning aid)
en
Removing the rails
The rails can be removed for cleaning.
Detaching the rails
1 Lift up the front of the rail and unhook it (figure A).
2 Then pull the whole rail forward and remove it
(Fig. B).
Clean the rails with cleaning agent and a sponge. For
stubborn deposits of dirt, use a brush.
Refitting the rails
1 First insert the rail into the rear socket and press it
to the back slightly (figure A).
2 Then hook it into the front socket (figure B).
The rails fit both the left and right sides. Ensure that, as
shown in figure B, the recess is below.
.
Catalytic cleaning (cleaning aid)
Catalyti c cleaning (cleaning aid)
You can order an oven ceiling and an oven back wall,
which are coated with a special catalytic enamelling, for
the cooking compartment as a spare part. Dirt is
removed at high temperatures during the catalytic
cleaning.
This process does not clean the non-catalytic
components, such as the cooking compartment floor,
side walls, inside of the door and glass panel.
You can delay the catalytic cleaning switch-off time (for
example, if you want the catalytic cleaning to run during
the night).
m Warning – Risk of burns!
The appliance will become very hot on the outside
during the cleaning function. Never touch the appliance
door. Allow the appliance to cool down. Keep children
at a safe distance.
Preparing catalytic cleaning
Remove coarse soiling and food remainders from
the oven.
Clean the oven interior base and side walls
manually, the door seals, the inside of the door and
the glass panel because the catalytic cleaning
process does not clean these parts.
Remove all loose interior parts from the oven
interior. There must be no objects left in the
interior.
Close the oven door.
Starting catalytic cleaning
1 Set the function selector to S.
2 The œ symbol is displayed. Confirm with .
3 The switch-off time, when catalytic cleaning will be
finished, is displayed. If required, move the switch-
off time with the rotary selector. Confirm with .
4 Remove all accessories and coarse soiling from the
oven interior. Confirm with .
5 Press I to start. The cleaning time elapses on the
display. If the switch-off time has been shifted, the
time up to the start of catalytic cleaning elapses in
the display. The lamp in the oven interior stays off.
A signal sounds after the catalytic cleaning has expired.
A message appears in the display. Leave the appliance
to cool down.



%

$ %
$
%
&DWDO\WLFFOHDQLQJ
_

27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BOP210112 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BOP210112 in the language / languages: English as an attachment in your email.

The manual is 1,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BOP210112

Gaggenau BOP210112 User Manual - German - 48 pages

Gaggenau BOP210112 User Manual - Dutch - 48 pages

Gaggenau BOP210112 User Manual - French - 52 pages

Gaggenau BOP210112 Installation Guide - All languages - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info