19
Automatic programmes
en
Applying settings for a dish
You are guided through the entire setting process.
Follow the instructions in the display.
Use the rotary selector to scroll through the individual
levels.
1 Set the function selector to ž.
2 Touch the i symbol. Press ™ to confirm.
3 Use the rotary selector to select the category and
press ™ to confirm.
4 Use the rotary selector to select the required dish
and press ™ to confirm.
The possible settings appear in the display. For
many dishes, you can change the settings to suit
your needs.
For some dishes, you must set the weight.
Tip: By touching the * symbol you will receive
additional information regarding accessories and
cooking preparation.
5 Press ™ to confirm the required settings. Follow
information shown on the display. Press I to start.
The time counts down on the display.
Once the cooking time has elapsed, an audible signal
sounds. The appliance stops heating. Turn the function
selector to 0.
m Warning – Risk of scalding!
When you open the appliance door, hot steam may
escape. Open the appliance door with care. Keep
children at a safe distance.
Opening the appliance door affects the cooking result.
Open the appliance door only briefly. The automatic
programme is interrupted and continues to run after
closing the appliance door.
Adding extra cooking time
After the cooking time has ended, you can leave some
dishes to continue cooking if you are not satisfied with
the cooking result.
A query appears in the display asking if you want to
continue cooking.
1 Press ™ to confirm.
2 Select a single or double cooking time, depending
on requirements.
3 Press I to start.
4 If the "Continue cooking" function has ended, turn
the function selector to 0.
Changing and cancelling
After starting the appliance, the settings can no longer
be changed.
If you want to cancel the operation, turn the function
selector to 0.
Calling up the last automatic
programmes used
The last five dishes with the selected settings are saved.
You have the option of saving these dishes with the
selected settings as individual recipes. ~ "Individual
recipes" on page 20
1 Set the function selector to ž.
i is displayed.
2 Touch the i symbol.
3 Use the rotary selector to select "Last automatic
programmes" and press ™ to confirm.
4 Use the rotary selector to select the required dish
and press ™ to confirm.
5 Enter a name for the dish and save. ~ "Entering
names" on page 21
