34
Delaying the Switch-off Time
If you want the catalysis to run at a later time (for
example during the night), you can change the
switch-off time. In this way you can use your oven
during the day as usual.
Make the settings as described in 1 and 2.
3 Press the
d key to change the switch-off time.
4 Press the b key to confirm.
After confirmation the
F symbol appears on the
display. The status bar shows the switch-off time of
the catalysis. Three dashes instead of the
temperature are shown on the display. After the
start of the catalysis the temperature appears on
the display.
A signal is sounded at the switch-off time.
Exception: There is no signal between 22.00 and
8.00.
The catalytic cleaning has ended. Switch off the
temperature knob.
Allow the oven to cool down fully.
Note
The duration of the catalytic cleaning cannot be
changed.
If the pyrolysis does not start and the G or r
symbol flashes on the display:
Check if the door is fully closed and the meat probe
has been removed.
If you want to stop the catalytic cleaning:
Switch off the temperature knob.
