512126
29
Zoom out
Zoom in
Previous page
1/44
Next page
29
--------
Power cut
Your appliance can bridge a power cut of a few
seconds. Operation continues.
If the power cut was for a longer period and the
appliance was in operation, a message appears in the
display. Operation is interrupted.
Set the function selector to 0, then the appliance can be
operated again as usual.
Demo mode
The ° symbol appears on the display when the
appliance is in demo mode. The appliance will not heat
up.
Briefly disconnect the appliance from the mains (switch
off the household fuse or the circuit breaker in the fuse
box). Then deactivate demo mode in the basic settings
within 3 minutes (see section entitled 'Basic settings').
Replacing the oven light bulb
It is possible to replace the oven light. Heat-resistant 60
W, 240 V halogen bulbs can be obtained from the after-
sales service or from a specialist retailer.
m Risk of electric shock!
When replacing the cooking compartment bulb, the
bulb socket contacts are live. Before replacing the bulb,
unplug the appliance from the mains or switch off the
circuit breaker in the fuse box.
Note: Always remove the new halogen bulb from the
packaging using a dry cloth. This increases the service
life of the bulb.
Method
Note: You must remove the whole appliance in order to
replace the cooking compartment light. Follow the
installation instructions.
1 Unplug the appliance from the mains or switch off
the circuit breaker in the fuse box.
2 Open the appliance door.
Undo the securing screws on the right and left-hand
side of the oven. Follow the installation instructions.
3 Carefully lift out the appliance.
4 Undo the screw from the light cover on the outer
left-hand side wall and remove the cover. (Fig. A)
Pull out the halogen light. (Fig. B).
5 Insert the new halogen bulb (Fig. C)
6 Screw the lamp cover in place.
Reassemble the appliance in the reverse order.
7 Switch the circuit breaker in the fuse box back on or
plug in the mains plug.
Replacing the glass cover
If the glass cover in the oven is damaged, it must be
replaced. You can obtain covers from the after-sales
service. Please supply your appliance's E number and
FD number.
Error message "Exxx" If an error message is displayed, turn the
function selector to
0; if the display goes
out, there was a non-recurring problem. If
the error occurs repeatedly or the display
remains on, please contact the after-sales
service and inform them of the error code.
%
$
&
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau BMP251110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau BMP251110 in the language / languages: English as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau BMP251110

Gaggenau BMP251110 User Manual - German - 44 pages

Gaggenau BMP251110 User Manual - Dutch - 44 pages

Gaggenau BMP251110 User Manual - French - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info