760921
8
Zoom out
Zoom in
Previous page
1/48
Next page
8
Intensive setting
You can use the intensive setting if there is a large build-
up of odours and fumes/vapours.
Switching on
1Press the # button.
The fan starts at setting 2.
2Press the Ž button.
Intensive mode is activated.
Note: Intensive mode runs for six minutes. Once
this time has elapsed, the appliance switches back
to the previously selected fan setting.
Switching off
Press the # button or the button for another fan
setting.
Intensive mode is deactivated.
Automatic mode
Switching on
1Press the # button.
The fan starts in fan setting 2.
2Press the < button.
The optimum fan setting 1, 2 or 3 is set
automatically by a sensor.
Switching off
Press the < or # button.
Automatic mode is switched off.
The fan switches off automatically if the air quality in the
room exceeds a certain level. Automatic mode can run
for a maximum of four hours.
Sensor control
In automatic mode, a sensor in the extractor hood
detects the intensity of the cooking and roasting fumes.
Depending on the setting of the sensor, the fan
automatically switches to another fan speed.
Default sensitivity setting: 2
Lowest sensitivity setting: 1
Highest sensitivity setting: 4
Changing the sensitivity of the sensor
If the sensor control reacts too quickly or too slowly,
change the sensitivity setting.
1When the fan is switched off, press and hold the <
button for approx. 4 seconds.
The setting is displayed.
2Press button 1, 2, 3 or the Ž button to change the
sensitivity setting.
3Press and hold the < button for approx.
4 seconds.
The change is saved.
Saturation display
If the metal grease filters are saturated, the œ button
flashes.
If you have not yet done so, the metal grease filters
should be cleaned now.
For instructions on how to clean the metal grease filters,
please refer to the Cleaning and maintenance section.
Resetting the saturation indicator
Press the œ button.
Lighting
The lighting can be switched on and off independently
of the ventilation system.
Switching on or off
Press the ž button.
Setting the brightness
Press and hold the ž button until the desired
brightness is reached.
Safety shut-off
For your safety, the appliance has a safety shut-off
function. The lighting switches off after 12 hours and
the fan after 4 hours if the appliance is not operated
during this time.
Button 1 = Sensitivity 1
Button 2 = Sensitivity 2
Button 3 = Sensitivity 3
Ž button = Sensitivity 4
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau AW442160 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau AW442160 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau AW442160

Gaggenau AW442160 User Manual - German, Dutch, French, Italian - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info