29
Changing the bulbs
Activated carbon filter
•
Activated carbon filters bind the odours in
circulating-air mode.
•
Under normal operation (daily 1 to 2 hours) the
activated carbon filters must be replaced
approximately 2x year.
•
The activated carbon filter is available from
specialist outlets, customer service or the
Online Shop (see Optional accessories). Use
original filters only.
•
Activated carbon filters do not contain any
pollutants. They can be disposed of in the
household refuse.
Installing and removing the activated carbon
filters
1 Remove the grease filters (see Removing and
installing the metal-mesh grease filters).
2 Insert the activated carbon filter.
3 Lock the catch.
4 Reinsert the grease filters (see Removing and
installing the metal-mesh grease filters).
•
Before changing the bulbs, always follow the
instructions and warnings in the chapter
entitled ”Safety instructions”!
•
The description of changing the bulbs applies
to several appliance models.
Note:Observe the warranty regulations in the
enclosed service booklet.
Changing the halogen bulbs
ṇ RISK OF INJURY
Halogen bulbs become very hot during operation.
Even some time after the appliance has been
switched off, there is still a risk of burns!
•
Defective bulbs should be replaced immediately
to avoid overloading the remaining bulbs.
•
Before changing the halogen bulbs, ensure that
they have cooled down fully.
1 Carefully remove the bulb ring with a suitable
tool.
2 Replace the defective bulb with a new one of
the same type and equivalent power (see rating
plate).
Note:When inserting halogen bulbs, do not touch
the glass tube. Therefore use a clean cloth when
inserting the bulb.
3 Reinsert the bulb cover.
4 Restore the power supply by inserting the
mains plug or switching on the fuse.
