Manual Gaggenau AF 280160 (page 25 of 124) (English, German, Dutch, French, Italian, Portuguese, Spanish)

109566

Zoom out

Zoom in

1/124

You can move the operating unit from

the middle of the ﬁlter drawer to the left

or right side.

The operating unit can also be ﬁtted at the

front in a handle moulding available as an

optional accessory or in the enclosed

handle moulding.

Moving the operating unit

1. Loosen the 2 screws from below.

2. Remove the operating unit and dis-

connect the plug from the ribbon cable.

3. Remove the side cover from the ﬁlter

drawer.

4. Connect the plug of the side ribbon

cable to the operating unit.

5. Insert the operating unit into the side of

the ﬁlter drawer.

ṇ Insert the excess ribbon cable.

6. Insert the cover into the middle of the

ﬁlter drawer and screw on the cover from

below with 2 screws.

Setting the saturation indicator

If the operating mode is to be switched

over (exhaust air/circulating air mode), the

saturation indicator for the ﬁlters must also

be switched over (see Installation

instructions).

Faults

is displayed:

❑ See "Filters and maintenance" Section.

If the extractor hood cannot be

operated:

❑ Isolate the extractor hood for approx.

1 minute by pulling out the mains plug or

switching off the fuse.

Then switch on again..

If you have any questions or if a fault

occurs, please call Customer Service.

(See list of Customer Service

representatives).

When you call, please quote the following:

E-Nr. FD

Enter the numbers in the above box. The

numbers can be found on the rating plate

inside the extractor hood following removal

of the grease ﬁlters.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau AF 280160 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 16,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Gaggenau AF 280160 Manual

Product: