761911
13
Zoom out
Zoom in
Previous page
1/52
Next page
12
Trouble shooting
Malfunctions often have simple explanations. Please
read the following notes before calling the after-sales
service.
mRisk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by one
of our trained after-sales technicians. If the appliance is
defective, unplug the appliance from the mains or switch
off the circuit breaker in the fuse box. Contact the after-
sales service.
mRisk of injury!
The light emitted by LED lights is very dazzling, and can
damage the eyes (risk group 1). Do not look directly into
the switched on LED lights for longer than 100 seconds.
LED lights
Defective LED lights must only be replaced by the
manufacturer, their customer service department or a
licensed technician (electrician).
Fault table
--------
Disruption Possible cause Solution
The appliance does not work The plug is not plugged into the mains Connect the appliance to the electricity
supply
Power failure Check whether other kitchen appliances
are working
Faulty fuse Check in the fuse box to make sure that
the fuse for the appliance is OK
The appliance is not working, all the but-
tons are flashing
The network-cable plug is not plugged
into the mains
Check that the network cables of all the
appliances are connected
The circuit breaker is faulty Look in the fuse box and check that the
circuit breakers for all the appliances are
in working order
One of the components in the appliance
has broken
Call the after-sales service
The appliance is not working If the appliance is in operation for more
than four hours, the safety switch-off
function is activated
Switch the appliance on again
The button illumination does not work The control unit is faulty Call the after-sales service
The lighting is not working The lighting is defective Call the after-sales service
The œ button flashes The metal filter is saturated Clean the filter, see the Cleaning and
maintenance section
The remote control is not working The batteries are flat Replace the batteries; see section
Replacing the remote control batteries
13
Replacing the batteries in the remote
control
1Press in the catch tappet and remove the cover.
2Remove the batteries.
3Correctly insert the new batteries (AAA/LR03/
1.5 V).
4Dispose of flat or faulty batteries according to local
regulations.
Note: Do not dispose of batteries in general household
waste.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau AC482181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau AC482181 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Gaggenau AC482181

Gaggenau AC482181 User Manual - German, Dutch, French, Italian - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info