761914
42
Zoom out
Zoom in
Previous page
1/112
Next page
en Installation instructions
42
11. Thread the four enclosed cable clamps and secure
in place approx. 20 mm in front of the cable ten-
sioner.
20 mm
2
Tighten the screws by hand.
12. Align the appliance using a spirit level.
13. Remove the protective film from the appliance.
Carefully remove the protective film around the
cables so that the appliance's limit switch is not
damaged.
14. Place the scissor lift table or another suitable device
under the appliance.
aThe appliance hangs on the cables from the ceiling.
15. Pull the cable on the appliance out completely.
16. ATTENTION!
There is a risk of damage to the appliance if the
cable is coiled up.
Always secure the cable firmly using the strain
relief so that it does not coil up fully in the appli-
ance.
Insert the cable on the appliance into the terminal
plug and place it in the strain relief.
LN
17. Close the cable cover.
18. Carefully lift the frame cover.
19. Place the ends of the cable behind the frame cover.
20. Securely tighten the frame cover with the lock nuts.
Do not use a tool to avoid damaging the frame
cover.
21. Remove the spacer from the appliance.
22. Connect a power supply.
23. To start the reference movement, press the but-
ton on the remote control.
The reference movement determines the correct ac-
tual position with a reference switch.
aThe appliance moves up.
24. If the appliance has moved up as far as it will go,
press the button on the remote control.
aThe appliance moves down.
aThe reference movement ends when the appliance
has moved down as far as it will go.
Fitting the filter cover
WARNING‒Risk of injury!
Components inside the appliance may have sharp
edges.
Wear protective gloves.
Risk of injury when opening and closing the hinges.
Keep your hands away from the hinges.
1. Adjust the appliance height on the remote control
using the button and the button.
If you have not carried out a reference movement,
the appliance automatically moves up and down as
far as it will go.
2. Open the hinges on the filter cover.
25
3. Tighten the fastening screws on the hinges.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau AC270101 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau AC270101 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 9,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info