761913

Gaggenau AC250121 Manual

29
Zoom out
Zoom in
Previous page
1/108
Next page
Basic operation en
29
7 Basic operation
You can find out everything you need to know about
operating your appliance here.
7.1 Switching on the appliance
Requirement:Align the remote control as precisely as
possible to the infrared receiver for the LED display.
▶Press to switch on the appliance.
aThe appliance starts at fan setting2.
aThe LED for the set fan setting lights up in the LED
display.
7.2 Switching off the appliance
Switch the appliance off when you are not using it.
▶Press to switch the appliance off.
aThe appliance switches off. Any functions currently
in progress are cancelled.
7.3 Selecting a fan setting
▶Press or ⁠.
aThe LED for the set fan setting lights up in the LED
display.
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
1. so oft drücken, bis in der LED-Anzeige die LED4
für die Intensivstufe1leuchtet.
2. so oft drücken, bis in der LED-Anzeige die LED5
für die Intensivstufe2leuchtet.
aAfter approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
▶To select a fan setting of your choice, press ⁠.
7.6 Switching on intermittent ventilation
With interval ventilation, the ventilation switches on for
approx. 6 minutes every hour.
Note:In the HomeConnect app, you can set the time
and fan setting individually.
▶Press ⁠.
aIn the LED display, LED6 flashes continuously, the
LED for the selected fan setting lights up on the ap-
pliance.
aAs soon as the ventilation time ends, the LED for
the fan setting you have selected goes out. LED6
continues to flash.
7.7 Switching off interval ventilation
▶Press ⁠.
7.8 Switch on automatic mode1
The optimum fan setting is set automatically using a
sensor.
▶Press ⁠.
aIn the LED display, LED6 lights up for automatic
mode.
7.9 Switch off automatic mode 1
▶Press ⁠.
aThe appliance switches to the fan setting that was
previously set.
aThe ventilation is automatically ended when the
sensor detects no further change in the room air
quality.
aAutomatic mode runs for a maximum of four hours.
7.10 Intermittent ventilation
With interval ventilation, the ventilation system switches
on and off in the selected setting for the selected time.
Note:This function is only available via a mobile device
with the HomeConnect app.
If the interval ventilation is switched on, LED6 continu-
ously flashes in the LED display for the interval ventila-
tion and the LED for the selected fan setting lights up.
As soon as the ventilation time ends, the LED for the
fan setting you have selected goes out. LED6 contin-
ues to flash.
7.11 Sensor control1
In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. De-
pending on the setting of the sensor sensitivity, the op-
timum fan setting is automatically switched on.
If the sensor control system reacts too weakly or too
strongly, the setting for the sensor sensitivity may
change.
¡Default setting: Fan setting3
¡Lowest setting: Fan setting1
¡Highest setting: Fan setting5
7.12 Setting the sensor control1
Requirement:The appliance is switched off.
1. Press and hold and for approx. 3 seconds.
2. Press or to change the setting.
To cancel the setting, press ⁠.
3. To save the setting, press and hold and for ap-
prox. 3 seconds.
Or wait approx. 10seconds until the setting is
saved automatically.
aA signal tone sounds as soon as the selected set-
ting is saved.
7.13 Setting the saturation indicator
The saturation indicator must be adjusted depending
on the filter used.
Requirement:The appliance is switched off.
1Depending on the appliance specifications
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Gaggenau AC250121 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Gaggenau AC250121 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info