803347

Fysic FXA-100 Manual

2
Zoom out
Zoom in
Previous page
1/8
Next page
The system is set
up by sending
SMS messages
to the emergency
key number using
another phone.
9
SMS
The alarm key must initialize the GPS system properly at rst. It is important to do this properly at rst so that you can make
optimal use of the GPS reception in future.
1. Program an SOS number as described above.
2. Activate the SOS on the alarm key, but do this outside where you can be assured of good GPS reception.
3. Accept the emergency call on your smartphone and wait until you receive the location (during the call) by SMS. This is
most likely another Network Location determination.
4. The call may be disconnected
5. Wait 5 minutes.
Repeat steps 2, 3 and 4 until you receive an SMS via GPS Location.
If you still receive the SMS with a Network Location, repeat these
steps at a di󰀨erent outside location.
If it still does not work, please contact our Service number
(see Manual).
V1.6
SMS codes:
Each SMS to be set starts with $ #, followed by the programming code, then a four-digit password (default “1234”),
then optionally a setting such as a phone number and ends with #.
Note that all programming codes must be sent in capital letters.
SOS1, SOS2, SOS3, SOS4 or SOS5 setting:
$#SOS1,1234,0612345678#
$#SOS2,1234,0612345678#
$#SOS3,1234,0612345678# etc.
0612345678 is the number here, replace it with the number you wish to set
SOS1, SOS2, SOS3, SOS4 SOS5 erasing:
$#SOS1,1234,#
$#SOS2,1234,#
$#SOS3,1234,# etc.
M1, M2 or M3 setting:
$#M1,1234,0612345678#
$#M2,1234,0612345678#
$#M3,1234,0612345678#
0612345678 is the number here, replace it with the number you wish to set
M1, M2 or M3 erasing:
$#M1,1234,#
$#M2,1234,#
$#M3,1234,#
Request location: $#GPS,1234#
By callback via emergency button: $#CALL,1234#
Call or vibrate: $#AU,1234,1# (1=Call, 2=Vibrate, 3=Call+Vibrate)
Activating/deactivating the warning tone when the battery is empty:
$#BATTERY,1234,1# / $#BATTERY,1234,0#
Setting up:
Specications:
Network: GSM900 / DSC1800 / WCDMA / LTE / WIFI
SAR:
<0,4W/kg/<0,6W/kg/<0,3W/kg/<0,4W/kg/<0,1W/kg
Power: GSM: 880-960MHz < 2W
DCS: 1710-1880MHz < 1W
WCDMA: 1850MHz-1990MHz < 0.2W
LTE: 1920-2170MHz < 0.2W
WIFI: 2412-2484MHz < 0.1W
10 GPS Initialisation:
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FXA-100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FXA-100 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 36.46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info