803328
8
Zoom out
Zoom in
Previous page
1/16
Next page
1. Remove all parts from the packaging and check whether all parts are present as shown in the overview
above.
2. Place the pedals (A) over the arch (B). Slide the washers (F) over the bolts (G) and place the bolts
in the appropriate holes in part (B). Tighten the nuts (H) with the supplied open-end wrench (D). It is
recommended to insert the Allen key (E) into the bolts to provide enough force while tightening the
nuts.
3. Slide the rst part of the exercise bike (A + B) over the upright tube of one of the T-shaped stands (C),
making sure that the upright tube holes are level with the holes on the exercise bike.
4. Slide the washers (I) over the bolts (J) and place the bolts in the appropriate holes in the base. Tighten
the bolts using the supplied Allen key (E).
5. Repeat steps 3 and 4 for the other side of the mobility trainer.
6. Turn the adjusting screw (K) into the top of the bottom bracket.
Note: Do not force the adjusting screw!
With this adjustment screw you set the FW8:
Turning clockwise = heavy pedalling
Turning anti-clockwise = light pedalling
7. The Adjustable foot straps can be tted to your foot size. Release the strap and choose the desired size
and eattach the strap to the pedal.
Specications
Model no.: Fysic FW8
Weight: 2.1kg
Dimensions (HxWxD): 26 x 40 x 53 cm
Class: H (Indoor use)
Body mass: Max. 120kg
B
C
2x
D
E
I
J
FGHK
2x 2x 2x
4x
4x
A
Adjustable foot straps
Commaxx B.V.
Wiebachstraat 37
6466 NG Kerkrade
The Netherlands
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FW8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FW8 in the language / languages: English, German, Dutch, Danish, French, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info