Manual Fysic FKW-2500 (page 23 of 28) (English, German, Dutch, French)

678952

Zoom out

Zoom in

1/28

DAILY SNOOZE AND ALARM CLOCK FUNCTION:

The weather station oers 4 alarm clock functions. The alarm clock is activated when the alarm

clock functions with a number appears in the display. The alarm clock function will start ashing

while the snooze function is enabled. Every 5 minutes an alarm signal will sound.

To set the wake-up time:

• Repeatedly press the “ALARM”(21) button to select the wake-up time. Choose

from wake-up time 1 through 4. Each wake-up time may be set individually.

• Go to the desired wake-up time (icon 1, 2, 3 or 4 and AL is visible).

• Press and hold the “ALARM” button for 2 seconds until the wake-up time hours

start ashing. Press the ▲(23) and ▼(16) buttons to set the desired hour.

• Press the “ALARM” button again; the wake-up time minutes start ashing. Press the ▲(23)

and ▼(16) buttons to set the desired minutes.

• Press the “ALARM” button again or wait 10 seconds to save your settings.

• Use the “AL 1-2” (23) button to select the desired wake-up time 1 and 2, use the “AL 3-4”

(16) button to select the desired wake-up time 3 and 4. This wake-up time is active when

the icon appears in the display. All 4 wake-up times or a combination of them may be se-

lected.

Wake-up time repetition:

Use the selection button 19 to set the wake-up time repetition to business

days Monday through Friday (MON - FRI) or to the entire week (MON -

SUN).

To disable the alarm signal:

As soon as an active wake-up time is reached, the weather station will sound an alarm signal.

Press any button (except the “SNOOZE” button) to stop the alarm signal. If no button is

pressed, the alarm signal will stop automatically after ± 2 minutes.

After 24 hours the alarm signal, connected to the set wake-up time, will sound again.

Snooze function:

During an alarm, press the “SNOOZE” (17) button to temporarily stop the alarm signal and

enter the snooze mode; the icon starts ashing. Upon activating the snooze mode, the alarm

signal will sound again after 5 minutes. This may be repeated for up to 7 times.

To cancel the snooze function during snoozing:

While snoozing, press the “ALERT” (20) button to cancel the snooze function.

The icon disappears.

THERMOMETER:

The temperature is shown at the left side in the display. Provided that the

outdoor sensor is registered, the outdoor temperature is shown at the right

side in the display. See “To manually set the weather station” to have the

temperature display shown in °C or °F.

When the measured temperature is outside the eective measuring range,

the display will show LL.L for values that are too low and HH.H for values that

are too high.

Temperature alert function:

You may only set an alert for the outdoor temperature.

You may set the desired temperature and as soon as the outdoor temperature exceeds the

set temperature an alert will sound. You may also set a lower limit for an alert as soon as the

outdoor temperature falls below the set temperature. Both thresholds can be enabled simultane-

ously.

D S T

AA 1,5V

ALARM MODE

MON - FRI

MON - SUN

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FKW-2500 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 10,63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fysic FKW-2500 Manual

Product: