470231
35
Zoom out
Zoom in
Previous page
1/40
Next page
35
POWER SUPPLY FOR THE MINI-BIKE
OPERATION OF THE MINI-BIKE
Please observe the following notes on the power supply and on the power cable in order to avoid
short-circuits and electrical shocks.
- The Mini-Bike is supplied with electrical power via a wall socket. Insert the power plug into a grounded
wall socket. We suggest not connecting additional electrical appliances to this wall socket, e.g. with
assistance of a multiple socket, because otherwise the electronics of the computer and the motor
could be damaged. In this case the guarantee for the Mini-Bike will be expired.
- Before each training make sure that the power plug is completely inserted into the wall socket and
does not wiggle.
- Always pull the power plug, if you do not use the equipment, if you clean it, maintain or build it up to
avoid an electrical shock. Never leave the Mini-Bike unsupervised, as long it is connected to the
electric mains. Always pull at the power plug, never pull at the power cord to disconnect the power
plug from the wall socket.
- Rotate the controller to the OFF position und pull the power plug to turn off the Mini-Bike.
- If you notice damage at the power cord, do not train under any condition with the equipment and
replace absolutely the damaged cord before the next training.
- Pay attention the power cord is not jammed by any objects.
- Do not twist or knot the power cord together.
Important! Place the Mini-Bike on flat and stable surface. We suggest laying a skid-proof pad e.g. a
rubber mat or the like, under the equipment in order to avoid possible damages to the floor.
1 Rotate the controller (2) to turn on the Mini-Bike and to adjust the desired speed.
2 Perhaps it can happen that the pedals lock due to sudden and strong load. In this case demount
briefly the Mini-Bike, turn it off and turn it on again after a short moment.
Note: after 15 minutes the Mini-Bike turns off automatically. You can continue the training
immediately, if you briefly turn the Mini-Bike off and turn it on again afterwards.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fysic FF-17 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fysic FF-17 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info