Manual Fuxtec FX-WB (page 19 of 41) (English, German, French, Italian)

781786

Zoom out

Zoom in

1/41

Original Manual 5in1 Workbench FX-WB de_en_fr_ita_rev1

Workbench & Sawhorse mode

3. Firstly, set up the legs by following the same steps as detailed with scaffold mode

section.

4. Pull up the let switch on the side of each leg to release them, then pull the inner

legs out to the workbench height, 66cm or 80cm. There are 3 locking positions,

each for a height. The lowest one is for scaffold mode which is 52cm, the second

is 66cm and the highest is 80cm. Gently turn the workbench upright onto a stable,

level surface.

5. Please follow below steps to connect with a quick clamp.

1) Remove the small plastic part of your quick clamp(Fig 1);

2) Put the steel bar into our connector (Fig 2) and push the pin into the lock hole,

make sure they are connected firmly(Fig 3);

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-WB in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-WB Manual

Product: