Original Bedienungsanleitung
FUXTEC FX-RTP350 / FX-TP1250 / FX-TP1350 / FX-TP1750 / FX-TP11100 (INOX)_de_en_fr_ita_rev09
14
SECURITY INSTRUCTIONS FOR YOUR SAFETY AND THE GOOD USE OF THE PUMP
a) SAFETY
• This equipment is suitable neither for drinking water nor for equipment in contact with dishes.
• Unplug the equipment from the mains before any intervention.
• When the pump is running, there must be no particles in the water (clean water only).
• Do not use the pump without a residual-current device
• The pump must be used with 230V AC Power supply, as indicated on the rating plate.
• Do not use the power cable for carrying the pump or for unplugging.
• Make sure that electric connections are protected from humidity.
• Avoid dry-running of the pump. Never use the pump if suction hose is obstructed.
• It is strictly forbidden to pump corrosive, easily combustible, aggressive or explosive liquids
(such as gasoline, petroleum or nitro thinner), saltwater and food
• The temperature of the liquid must not exceed 35°C.
• (30mA).
• Do not use the pump if safety devices are damaged or depleted. Never deactivate safety
devices.
b) PUMP ENVIRONMENT
• Do not operate pumps in explosive atmospheres, such as in the presence of flammable
liquids, gases or dust.
• Keep children and unqualified persons away from the pump when it is in use.
c) ELECTRIC SAFETY
• The pump cable plug must match the socket. Never modify the plug in any way. Do not use
any adapter plugs. Unmodified plugs and matching sockets will reduce risk of electric shock.
• Avoid body contact with earthed or grounded surfaces.
• Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the pump. Keep
cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
• When operating a pump outdoors, use an extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric shock.
• The pump is equipped with a socket compatible with it. The power source of your country
must be in keeping with international regulations.
• If supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid hazard.