781826

Fuxtec FX-SG7500 Manual

35
Zoom out
Zoom in
Previous page
1/87
Next page
Original User Manual Generator FX-SG Series
34
AC fuse switch
◼ Switch the AC fuse switch to the "ON"
position.
DC-DC connection for charging an
external battery
This function is intended for the external
charging of a 12 V battery.
CAUTION!
The 12 V battery may only be charged
when it is removed.
◼ Press the DC to reset critical (12V
overload protection).
Check or observe the following:
◼ If the DC Reset (12V overload
protection) is pressed.
◼ The generator must not be in operation.
◼ When connecting the battery, pay
attention to the polarity of the charging
cable and the battery.
− Cable: Red = Plus (+)
− Cable: Black = Minus (-)
◼ Observe the battery manufacturer's
charging instructions.
◼ Insert the charging plug of the
charging cable into the 12 V socket
of the generator.
◼ Start the generator - the battery is
charged.
CAUTION!
After the charging process is completed,
first switch off the generator and only then
disconnect the battery!
WARNING!
Flammable gases develop when
charging a battery.
− Therefore, make sure that there is
sufficient ventilation during the
charging process.
− Keep all sources of ignition away
(smoke, fire, naked lights, etc.).
− Wear acid-proof gloves and protective
goggles to protect yourself from leaking
battery acid.
NOTE
Do not charge a battery whose capacity
exceeds 50 Ah.
Charging times for batteries
Capacity
Eh
Chargin
g time
Eh
30
Ah
6
h
35
Ah
7
h
47
Ah
9
h
NOTE
The charging times given apply to
batteries in perfect condition.
Do not charge a battery whose
capacity exceeds 50 Ah.
Do not operate any consumers at the
230 V socket during charging.
Fuel tap
◼ Set the fuel tap to the "ON" position.
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-SG7500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-SG7500 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info