781731
35
Zoom out
Zoom in
Previous page
1/114
Next page
Original Bedienungsanleitung FUXTEC FX-PS152 / FX-PS162_de_en_fr_ita_rev06
35
23. Intended use and general safety instructions
This device may only be used for mowing or trimming grass, weeds, and
undergrowth. Never apply it for other purposes, as this may result in serious
injury!
Correct safety instructions must be followed. DO NOT EXPOSE YOURSELF OR OTHERS TO
DANGER. Follow these general safety instructions:
Always wear safety glasses for eye protection. Long hair must be tied back. Do not
wear loose clothing or jewelry that may get caught in moving parts of the device.
Safe, secure, non-slip safety shoes must always be worn. It is recommended that
legs and feet are fully protected to protect against flying objects during operation.
Check the entire device for loose parts (nuts, bolts, screws, etc.) Service or replace
them if necessary before using the device. Do not use accessories with this drive
head other than those recommended by the manufacturer. Otherwise, severe injury
to the user or bystanders and damage to the device may result.
Keep the handles free of oil and fuel.
Always use correct handles and the shoulder strap when cutting
Do not smoke when mixing the fuel or filling the tank
Do not mix fuel in an enclosed space or near open fires. Make sure there is sufficient
ventilation/aeration
Mix and store the fuel mixture in a sealed container approved for such use according
to local regulations.
Never remove the fuel filler cap while the device is running
Do not operate the device in closed rooms or buildings. Exhaust gases contain
dangerous carbon monoxide.
Do not try to adjust the device while walking or carrying it. Always set the device on
a flat, free surface.
Do not use the device if it is damaged. Never remove protective devices from it.
Failure to do so may result in serious injury to the operator or bystanders and
damage to the device.
Check the area to be cut and remove any residue that may be entangled in the nylon
cutting head or cutting blade. Also, remove all possible objects that the device could
throw around while cutting.
Never leave the device unattended.
Don't stretch yourself too far forward. Always maintain a firm stand and balance. Do
not run the device while standing on a ladder or any other unstable standing
position.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-PS152 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-PS152 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 3.07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info