Manual Fuxtec FX-PR165 (page 22 of 67) (English, German, French, Italian)

781748

Zoom out

Zoom in

1/67

4.Preparation before Use

4.1Piling Socket

4.1.1 Install or change piling socket retainer. Select a corresponding retainer according to the sizes of the piling from 20-

45 or 46-80, as it’s shown in Fig.3., such as

4.2 Fuel

Use 90# gasoline and two-stroke special engine oil or above

Recommended mixing ratio

Condition

Gasoline: engine oil

Operation within 20 hours

20:1

Operation of over 20 hours

25:1

4.2.1 Pure gasoline (without two-stroke engine oil) is forbidden as fuel.

4.2.2 Add fuel in a well-ventilated place.

4.2.3 Do not add too much oil. The oil shall not exceed the neck of oil can. If fuel spills, wait until the fuel volatilizes

completely and then start the machine.

4.2.4 After refueling, tighten the lid of Oil can.

5.Starting

5.1. Before starting the new machine, press the transparent and semi-circle fuel bubble repeatedly (Fig.4) until carburetor

is filled with fuel. (If the engine is cool, close the air door. Open air door after starting.)

Fig 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-PR165 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.43 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-PR165 Manual

Product: