Manual Fuxtec FX-MSP2.2 (page 26 of 85) (English, German, French, Italian)

781781

Zoom out

Zoom in

1/85

Original-Bedienungsanleitung FUXTEC FX-MSP2.2_de_en_fr_ita_rev09

5. Starting the machine

1) Switch the dust nozzle to the lowest position before starting the machine.

Otherwise, the chemical will be sprayed when you start the engine.

2) It is forbidden to stand at the front of the blow nozzle. Even if the spray nozzle

is closed, residues of the residual dust may be deposited on the tube.

6. Nebulizing / Fogging

1) It is recommended to use the device in cold weather. For example: in the early

morning or late afternoon. This can reduce the evaporation of the chemical and

thus improve the effect.

2) If your mouth or eyes contact the chemical, wash them out immediately with

water and see your doctor immediately.

3) If you have headaches or a dizzy spell, stop working with the machine and see

a doctor for safety reasons.

4) When preparing the pesticides, the user should follow the instructions on the

label.

5) It is forbidden to use special liquids, those with strong acids or lye, etc.

Safety symbols on the machine

WARNING: Improper operation can lead to

severe injuries!

Read this manual carefully to understand how to

use this device properly!

Please wear hearing protection during work!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-MSP2.2 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Fuxtec FX-MSP2.2 Manual

Product: