781735
37
Zoom out
Zoom in
Previous page
1/118
Next page
Original Bedienungsanleitung FUXTEC FX-MS152 / FX-MS162_de_en_fr_ita_rev16
37
23. Intended use and general safety instructions
This device may only be used for mowing or trimming grass, weeds, and
undergrowth. Never use it for other purposes, as this can cause serious
injuries!
Correct safety instructions must be followed. DO NOT EXPOSE YOURSELF OR OTHERS
TO DANGER. Follow these general safety instructions:
Always wear safety glasses for eye protection. Long hair must be tied back. Do
not wear loose clothing or jewelry that can get caught in moving parts of the
device. Always wear safe, non-slip and robust safety shoes. It is recommended
that legs and feet are fully protected to guard against flying objects during
operation.
Check the entire device for loose parts (nuts, bolts, screws, etc.). Service or
replace them if necessary before using the device. Do not use accessories with
this drive head other than those recommended by the manufacturer. Otherwise,
severe injury to the user or bystanders and damage to the device may result.
Keep the handles free of oil and fuel.
Always use the handles and shoulder strap when cutting.
Do not smoke when mixing the fuel or filling the tank
Do not mix fuel in an enclosed space or near open fires. Ensure adequate
ventilation / aeration.
Mix and store the fuel mixture in a marked container approved for such use
according to local regulations
Never remove the fuel filler cap while the engine is running.
Do not operate the device in enclosed spaces or buildings. Exhaust gases contain
dangerous carbon monoxide.
Do not attempt to adjust the device while running or carrying it. Always fix the
device on a flat, free surface.
Do not use the device if it is damaged. Never remove any protective devices from
the device. This can cause serious injury to the operator or bystanders and
further damage to the device.
Check the area to be cut and remove any objects that may be entangled in the
nylon cutting head or cutting blade. Also, remove any objects that the device
may throw around while cutting.
Never leave the device unattended.
Do not stretch out far forward. Always maintain a firm stand and balance. Never
let the device run while standing on a ladder or any other unstable standing
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-MS162 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-MS162 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info