781738

Fuxtec FX-MHP126 Manual

35
Zoom out
Zoom in
Previous page
1/105
Next page
Original Bedienungsanleitung FUXTEC FX-MHP126_de_en_fr_ita_rev05
35
18. INTENDED USE / NON-INTENDED USE
The petrol-powered hedge trimmer is exclusively intended for cutting hedges or bushes.
The maximum branch diameter of the hedge must not exceed 28mm.
Proper use also includes reading and following the operating instructions before each
use. Check the hedge trimmer for mechanical damage before and throughout use. If
repairs are necessary, contact FUXTEC UK.
Only spare parts approved by the manufacturer or original spare parts may be used. The
hedge trimmer may only be operated in open garden areas.
If non-approved or non-original spare parts are used, the operator and not the
manufacturer is liable for any damage to property or personal injury.
Any use other than that mentioned above is an improper use.
OTHER RISKS
Even when the tool is used properly, there is always a certain residual risk that cannot
be ruled out. The following potential hazards can be derived from the type and design of
the tool:
- Contact with the unprotected cutting blade (cutting injuries).
- Reaching into the operating hedge trimmer (cutting injuries).
- Unforeseen, sudden movement of the material being cut (cutting injuries).
- Disposing of defective cutting teeth.
- Centrifuging of parts of the material to be cut.
- Damage to hearing if specified hearing protection is not worn.
- Inhalation of cutting material particles, exhaust gases from the combustion engine.
- Contact with petrol on the skin.
- Burns from touching hot surfaces.
Warning: The actual vibration emission value present throughout the use of the device
may differ from that specified in the instruction manual or by the manufacturer. This can
be caused by the following factors, which should be considered before each use or
throughout DURING USE:
- Is the device being used correctly?
- Is the way of cutting the material or how it is processed correct?
- Is the device in a correct state of use?
- Is the cutting tool sharp enough?
- Are the handles firmly mounted on the device body?
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Fuxtec FX-MHP126 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Fuxtec FX-MHP126 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 2.2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info